MIRROR
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION 1 3 2 MIRROR QTY 1 WALL ANCHOR QTY 2 SCREW QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
ASSEMBLY NOTE: Do not mount the mirror directly onto the vanity surface or back splash. A minimum gap of 10 mm must be left on the top of the vanity. STEP 1 • • • • Determining Measurements Lay the Mirror (1) face down on a soft no scratch surface. Measure the distance from the top of the Mirror to the top of the slot of the Mirror bracket. Record this measurement (Measurement A). Mark the vertical centerline of the Mirror.
ASSEMBLY STEP 2 • • • • • Measuring Mirror Placement Subtract Measurement A from Measurement B to get Measurement C (this will give the height position of the Screws (3) on the wall). On the vertical center line mark Measurement C. Use a level to draw a horizontal line. Measure the center distances between the Mirror brackets on the rear of the Mirror.
ASSEMBLY WARNING: When drilling the holes in the wall, please be sure to avoid any internal cables and pipelines STEP 3 • • • Drilling Holes in the Wall Take the measurement distance between the mirror brackets and divide by 2. Mark this dimension on both sides of the center line and on the horizontal line. Drill 8 mm pilot holes into the wall.
ASSEMBLY STEP 4 • • • Hanging the Mirror Tap the Wall Anchors (2) into the holes and insert the Screws (3) leaving 5 mm of the Screw exposed. Lift the Mirror above the Screws (3) at an angle and align with the clips. Reduce the angle of the Mirror to the wall and slide it down so the Mirror brackets catch the mirror clips.
ASSEMBLY STEP 5 • Securing the Mirror Check that the Mirror clips are secured in the Mirror brackets.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
Question, problems, missing parts? Before returning your product please email Customer Support at customerservice@simpli-home.com or call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.