Instructions / Assembly

10/12
ASSEMBLY
STEP 5
1. Attach 2 Cam Lock Pins 2 and 3 Dowels 4 to each Side AL , AR using guide holes .
2. Align Cam Lock Pins 2 with pre-drilled holes on Back Panel I and Dowels 4 with
pre-drilled holes on Top Shelf D .
3. Insert 4 Cam Locks 2 into pre-drilled holes on Back Panel I ( 2 / each Side) .
4. Use flathead screwdriver secure Cam Locks.
5. Insert 6 Allen key screws 1 into pre-drilled holes through centre Bottom Frame C into
Sides AL , AR (3 screws / each Side).
6. Use Allen key 3 to tighten. Do not over-tighten.
C
D
2
1
2
4
4
1
1
I
ALAL
ARAR
MODEL # AXCAMH-002NAB
Front / Avant
Front / Avant