Instructions/Assembly Guide

Table Of Contents

ASSEMBLY

STEP 11

1. Attach hinges on Doors F to Sides BL , BR using Phillips Screws 4 into pre-drill holes:

- Using Phillips screwdriver to attach Screws 4 at middle hole of hinges for both top &

bottom hinges.

- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.

- Using Phillips screwdriver to tighten the rest of screws 4 into pre-drill holes ( top & bottom

holes on hinges).

2. Attach Magnet Plates 8 to bottom corners of Doors F using Phillips Screws 5 into

pre-drill holes on Doors F .

3. Attach Magnets 8 using Phillips Screws 5 into pre-drill holes on Bottom Shelf D .

4. Use Phillips screwdriver to attach Handles 7 to Doors F .

17/22

MODEL # AXCART17-TB

First Step

Last Step ( after adjust the door )