TM SIMP HOME ® LIFE BY DESIG N TM GATSBY / MARSHAL / BROCKTON SINGLE DOOR WALL CABINET MODEL # AXCBCGAT-03 1/17
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCBCGAT-03 . . BL BR t/A Fron Fron vant t/A van t Anatv /oFrnt TOP QTY 1 . LEFT SIDE QTY 1 . C RIGHT SIDE QTY 1 . D /oFrnt E Anatv BOTTOM SHELF QTY 1 . . . G H l ac i t reV / ed i S pU F SHELF QTY 1 MIDDLE SHELF QTY 1 DOOR QTY 1 BACK PANEL QTY 1 BACK BAR QTY 1 . I WALL MOUNT BAR QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION . MODEL # AXCBCGAT-03 HARDWARE DESCRIPTION 1 2 . CAM LOCK PIN CAM LOCK QTY 14 SETS . . 3 WOOD DOWEL Ø8 X 30mm QTY 6 . 4 HINGE QTY 2 . 5 HANDLE M4 X 25 mm QTY 1 SET MAGNET AND PLATE QTY 1 SET . 6 . 7 . 8 PHILLIPS SCREW M4 X 50mm QTY 3 SHELF SUPPORT QTY 4 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 2 9 PHILLIPS SCREW M3 X 15mm QTY 12 .
COMPONENTS-KEY DIAGRAM MODEL # AXCBCGAT-03 nt va t on Fr /A A H I lacitrV e/ediSU p G BL E / nt Av BR t an o Fr t/ t an Av on Fr D t an / nt ro F Av C F 7/17
ASSEMBLY MODEL # AXCBCGAT-03 P STEP-1 X 1 1 1 t/ n Fro nt Ava BR 1 1 9 nt Fro 4 ant v /A BL 1. Attach Cam Lock Pins 1 into pre-drilled holes on each part BL , BR . 2.AttachMagnets4usingPhilpsScrews9intopre-driledholesLeftSideBL. 3. Use Phillips screwdriver to secure Cam Lock Pins and Scews. Do not over-tighten. A t ron 2 2 t van /A F H 2 4. Insert Dowels 2 into guide holes on parts A , H . 5. Use rubber mallet to tap Dowels 2 into bottom of holes securely.
ASSEMBLY MODEL # AXCBCGAT-03 STEP-2 /o n trF tnavA /o n trF A BL tnavA D 1 1 /o n trF /o n trF 1 tnavA A BL tnavA D 1.AlignWoodDowelandCamLockPinswithguideholesand attachpartsA,DtoLeftSideBL. 2.InserttwoCamLocks1intoguideholesoneach 3.Use Philpsscrewdriver tosecureCamLocks. partA,D.
ASSEMBLY MODEL # AXCBCGAT-03 STEP-3 H /o n trF tnavA /o n trF BL tnavA A C /o n trF tnavA 1 H /o n trF /o n trF 1 tnavA A BL tnavA D C /o n trF 1 tnavA 1. Align Wood Dowels with guide holes and attach part H to Left Side BL . 2. Align Cam Lock Pins with guide holes and attach part C to Left Side BL . 3. Insert Cam Locks 1 into guide holes on parts C , H . 4. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBCGAT-03 STEP-4 Warning Label H BL calVietr/dUeSip G A C Front / Avant 1. Slide Back Panel G firmly into slots on parts A , C and Left Side BL .
ASSEMBLY MODEL # AXCBCGAT-03 STEP-5 Front / Avant Front / Avant Front / Avant A D BL Front / Avant C A Front / Avant Front / Avant Front / Avant 1 Front / Avant BL C 1. Repeat Step-2, Step-3 and Step-4 for the Right Side BR .
ASSEMBLY MODEL # AXCBCGAT-03 STEP-6 H 1 t Fron 1 / Av ant G 8 8 1.InsertoneCamLock1intoguideholeon 2.Use Philpsscrewdriver tosecureCamLocks. 3.UsePhilpsScrewsRoundHead8toattachBackPanelHthroughguideholes. 4.UsePhilpsscrewdrivertosecureScrews.Donotover-tighten. partH. STEP-7 t Fron ant / Av E 6 1.UsefourShelfSupports6forCabinetShelfEindesiredlocation.
ASSEMBLY MODEL # AXCBCGAT-03 STEP-8 4 9 5 F 3 9 1.AttachHinge3toDoorFusingPhilpsScrews9intopre-driledholesonDoorF. 2.AttachMagnetPlates4totopcornerofDoorFusingPhilpsScrews9into pre-driledholesonDoorF. 3. UsePhilpsscrewdrivertoattachHandle5toDoorF. STEP-9 F BR 9 1.AttachHingesonDoorFtoRightSideBRusingPhilpsScrews9intopre-driled holesonRightSideBR. 2. Use Phillips screwdriver to secure screws.Donotover-tighten.
ASSEMBLY MODEL # AXCBCGAT-03 STEP-10 - Positioning a I b c 10 1. Determine the location for the unit on the wall. The Top A should be approximately 1 ¼” above the top of the Wall Mount Bar I when mounted. 2. Place the Wall Mount Bar I at the predetermined height. Use a level to ensure that it is straight. The flat side of Wall Mount Bar I should face outward away from the wall. Hole (b) should align with your studs. Carefully mark the position of each hole using the tip of the Phillips Screw 7 . 3.
ASSEMBLY MODEL # AXCBCGAT-03 STEP-12 I I I 1. Align the top of the Wall Mount Bar I with the bottom of the angled bracket on the back of the Cabinet. 2. Gently slide the Cabinet down on to the Wall Mount Bar I .
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
