Full Product Manual

/1714
STEP-8
ASSEMBLY
MODEL # AXCBCGAT-03
1. Attach Hinge 3 to Door F using Phillips Screws 9 into pre-drilled holes on Door F .
2. Attach Magnet Plates 4 to top corner of Door F using Phillips Screws 9 into
pre-drilled holes on Door F .
3. Use Phillips screwdriver to attach Handle 5 to Door F .
STEP-9
1. Attach Hinges on Door F to Right Side BR using Phillips Screws 9 into pre-drilled
holes on Right Side BR .
2.
Use
Phillips screwdriver
to secure screws
. Do not over-tighten.
3
9
4
5
9
9
F
F
BR