TM SIMP HOME ® LIFE BY DESIG N TM AVINGTON / MIA / HAYES SINGLE DOOR WALL CABINET MODEL # AXCBSAVN03-WH 1/18
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCBSAVN03-WH . . BL BR Fron vant t/A t/A Fron / Av t Fron vant ant TOP QTY 1 . LEFT SIDE QTY 1 . C RIGHT SIDE QTY 1 . D E t van t/A Fron BACK PANEL QTY 1 BOTTOM SHELF QTY 1 . . F . G SHELF QTY 1 DOOR QTY 1 H FRONT BAR QTY 1 BACK BAR QTY 1 . I WALL MOUNT BAR QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION . MODEL # AXCBSAVN03-WH HARDWARE DESCRIPTION 1 2 . CAM LOCK PIN CAM LOCK QTY 4 SETS . . 3 WOOD DOWEL Ø8 X 30mm QTY 14 . 4 HINGE QTY 2 . 5 PHILLIPS SCREW M4 X 50mm QTY 7 MAGNET AND PLATE QTY 1 SET . 6 . 7 .
COMPONENTS-KEY DIAGRAM A MODEL # AXCBSAVN03-WH Front / Avan t I H G BR D F Front Front / Ava nt / Avan t BL E Front C / Avan t 7/18
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-1 G H 2 1. Insert four Dowels 2 into guide holes on each part G , H . 2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of Dowels should be exposed. STEP-2 Front / Avant G BL H G Front / Avant BL H 1. Align Wood Dowels with guide holes and attach parts G , H to Left Side BL .
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-3 Front / Avant G Front / Avant H BR BL 1. Repeat Step-2 for the Right Side BR . Front / Avant Front / Avant STEP-4 BR 2 BL 1. Insert two Dowels 2 into guide holes on each Side BL , BR . 2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-5 C Front / Avant BL Front / Avant Front / Avant Front / Avant BR BL C Front / Avant Front / Avant BR Front / Avant Front / Avant 1. Align Wood Dowels with guide holes and attach Side BL , BR to Bottom Shelf C . 5 Front / Avant BL BR C 5 2. Use four Phillips Screws 5 to attach Bottom Shelf C through guide holes from Bottom Shelf C to pre-drilled holes of Sides BL , BR . 3. Use Phillips screwdriver to secure Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-6 Warning Label D D G H BL Fron t/A BR Fron H t/A vant Fron vant t/A vant C D G H D H BL BR Fron t/A vant C 1.SlideBackPanelDfirmlyintoslotsonSidesBL,BRandBottomShelfC.
ASSEMBLY MODEL # AXCBSAVN03-WH P STEP-7 X 1 1 Fron 1 t/A van t A 1. Attach four Cam Lock Pins 1 into pre-drilled holes on Top A . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten. STEP-8 2 A Front / 2 vant Front / Avant BL BR Front / Avant C 1. Insert two Dowels 2 into guide holes on each Side BL , BR . 2. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-9 Front / Front / Avant A A Avant Front / BL Avant BR Front / BR BL Avant C C 1. Align Cam Lock Pin and Wood Dowels with guide holes on Sides BL , BR and Top A and attach Top A to Sides BL , BR . A A BL BR C C 1 2. Insert two Cam Locks 1 into guide holes on each Side BL , BR . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-10 6 A 4 BL BR C 6 8 8 F 1.AttachMagnets4usingPhilpsScrews6intopre-driledholesRightSideBR. 2.UsefourShelfSupports8forCabinetShelfFindesiredlocation.
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-11 2 4 6 E 6 7 1.AttachHinge2toDoorEusingPhilpsScrews6intopre-driledholesonDoorE. 2.AttachMagnetPlates4totopcornerofDoorEusingPhilpsScrews6into pre-driledholesonDoorE. 3. UsePhilpsscrewdrivertoattachHandle7toDoorE. STEP-12 BL E 6 1.AttachHingeonDoorEtoLeftSideBLusingPhilpsScrews6intopre-driled holesonLeftSideBL. 2. Use Phillips screwdriver to secure screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-13 - Positioning I b c a 9 9 1. Determine the location for the unit on the wall. The Top A should be approximately 1 ¼” above the top of the Wall Mount Bar I when mounted. 2. Place the Wall Mount Bar I at the predetermined height. Use a level to ensure that it is straight. The flat side of Wall Mount Bar I should face outward away from the wall. Hole (c) should align with your studs. Carefully mark the position of each hole using the tip of the Phillips Screw 5 .
ASSEMBLY MODEL # AXCBSAVN03-WH STEP-15 I I I 1. Align the top of the Wall Mount Bar I with the bottom of the angled bracket on the back of the Cabinet. 2. Gently slide the Cabinet down on to the Wall Mount Bar I .
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
