Instructions / Assembly

ASSEMBLY
STEP 3
N
O
L
STEP 4
L
10
1. Use Phillips Screwdriver to attach Handle 10 to Drawer Front L .
Repeat Step 1-4 for the second drawer.
1
4
1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .
2. Attach Drawer Back N using two Allen Key Screws 1 through guide holes on
each side ML , MR .
3. Use Allen key 4 to tighten. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
10/20
MR
ML
MODEL # AXCBURTVS-GR