User Manual

10/20
ASSEMBLY
STEP 3
1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front J .
Repeat Step 1-4 for the second drawer.
STEP 4
1. Align Drawer Back L with Drawer Bottom M and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each Side KL , KR .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
J
KR
KL
M
L
1
4
9
MODEL # AXCCON47-LGB