User Manual

15/20
ASSEMBLY
STEP 11
1. Attach hinges on Doors H to Sides BL , BR using Phillips Screws 7 into pre-drill holes:
- Using Phillips screwdriver to attach Screws 7 at middle hole of hinges for both top &
bottom hinges.
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
- Using Phillips screwdriver to tighten the rest of screws 7 into pre-drill holes ( top & bottom
holes on hinges).
2. Attach Magnet Plates 10 to bottom corner of Doors H using Phillips Screws 8 into
pre-drilled holes on Doors H .
3. Attach Magnets 10 using Phillips Screws 8 into pre-drilled holes on Bottom Shelf F .
4. Use Phillips screwdriver to attach Handles 11 to Doors H through guide holes.
First Step
Last Step ( after adjust the door )
7
7
7
H
H
BL
BR
10
8
8
11
MODEL # AXCCON47-LGB