Connaught / Hampshire / Somerset Entryway Storage Cabinet Model # AXCCON47-MSB 1
Great quality is a right. Thank you for shopping with Simpli Home, America's top brand for high-value furniture. It's time to register your product warranty. It's quick and easy. And you'll be happy you did. ü Ac vate your 1-year warranty ü Automa c entry to win a $500 gi cer ficate ü Earn instant rewards and save simpli-home.
Review your product and collect rewards! Thank you for your purchase! We hope you enjoy it. We’d love your feedback. Please share a review and get instant rewards! simpli-home.com/product-review Share photos and get your cash back! Send us images or share them on social and qualify for instant rewards. You may even receive store credit on your en re purchase! simpli-home.
For Fastest Customer Service: 1. Open your phone’s camera. 2. Point your phone’s camera at the QR code to scan. 3. Click on the pop up. 4. You’ll be taken to our customer service page. 5. Fill the form with your order informa on and issue. 6. Submit form. 7. A customer service associate will contact you. Other ways to contact us… Email Us Visit Us customerservice@simpli-home.com Visit our site directly at www.simpli-home.
IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. Safety Information CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
Care & Maintenance This furniture is designed for indoor use. Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions. As humidity changes, the components of wooden objects are continually pushing and pulling against each other.
Pre-Assembly Information Model # AXCCON47-MSB Part Description A BL BR Fro nt / Ava nt Fro nt / Ava nt nt Ava nt / Fro TOP QTY 1 C LEFT SIDE QTY 1 D RIGHT SIDE QTY 1 E Fro nt / Ava nt Fro nt / Ava nt Fro nt / Ava nt Fro nt / Ava nt SMALL DIVIDER QTY 1 LARGE DIVIDER QTY 1 F G MIDDLE FRAME QTY 1 H Fro nt / Ava nt BOTTOM SHELF QTY 1 CABINET SHELF QTY 2 DOOR (L&R Same) QTY 2 7
Pre-Assembly Information Model # AXCCON47-MSB Part Description IL J IR Warning Label LEFT BACK QTY 1 KL L KR LEFT DRAWER SIDE QTY 2 DRAWER FRONT QTY 2 RIGHT BACK QTY 1 RIGHT DRAWER SIDE QTY 2 DRAWER BACK QTY 2 M DRAWER BOTTOM QTY 2 8
Pre-Assembly Information Model # AXCCON47-MSB Hardware Description 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 26 5 WOOD DOWEL Ø8 X 30 mm QTY 16 CAM LOCK PIN CAM LOCK QTY 16 SETS 6 7 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 21 9 4 3 SHELF SUPPORT QTY 12 10 ALLEN KEY QTY 1 8 PHILLIPS SHORT SCREW PHILLIPS MEDIUM SCREW M3 X 12 mm M3 X 15 mm QTY 12 QTY 8 11 12 a. b. c.
Components - Key Diagram Model # AXCCON47-MSB Fron t/A van t IR Fron t/A van t Fron t/A van t IL Fron t / Av ant BL BR H H Fron t/A van t Fron t/A van t Fron t/A van t KR KL 10
Assembly Model # AXCCON47-MSB Step 1 KR KL J 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front J . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides KL , KR. 3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side KL , KR. 4. Use flathead screwdriver secure Cam Locks. Step 2 M KR J KL 1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and Drawer Front J .
Assembly Model # AXCCON47-MSB Step 3 L KR 1 4 M KL 1. Align Drawer Back L with Drawer Bottom M and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through guide holes on each Side KL , KR. 3. Use Allen Key 4 to tighten screws. Do not over-tighten. Step 4 NOTE: The screwdriver is not included in the hardware pack. J 9 1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front J . Repeat Step 1-4 for the second drawer.
Assembly Model # AXCCON47-MSB Front / Avant Front / Avant Step 5 Front / Avant Front / Avant 1 4 1. Attach Small Divider D to Middle Frame E using 2 Allen Key Screws 1 . 2. Use Allen Key 4 to tighten screws. Do not over-tighten. Step 6 Front / Avant Front / Avant Front / Avant Front / Avant 3 2 1. Insert 2 Dowels 3 into guide holes on Large Divider C . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3.
Assembly Model # AXCCON47-MSB Front / Avant Step 7 Front / Avant 1 3 Front / Avant Front / Avant Front / Avant 4 1. Insert 2 Dowels 3 into guide holes on Large Divider C . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Attach Large Divider C to Bottom Shelf F using 3 Allen Key Screws 1 through guide holes. 4. Use Allen Key 4 to tighten screws. Do not over-tighten.
Assembly Model # AXCCON47-MSB Step 8 1 3 BR BL Front / Avant Front / Avant Front / Avant Front / Avant 4 3 2 1. Insert 4 Dowels 3 into guide holes on each Side BL , BR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to each Side BL , BR into pre-drilled holes. 4. Align and insert Cam Lock Pins on Sides BL , BR into guide holes on Bottom Shelf F . 5. Place 6 Cam Locks 2 into guide holes on Bottom Shelf F . 6.
Assembly Model # AXCCON47-MSB 3 Step 9 1 Front / Avant 4 Front / Avant Front / Avant Front / Avant Front / Avant BL BR 1 4 1. Insert 2 Dowels 3 into top corners of each Side BL , BR . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Align guide holes bottom corners of Top A with Dowels 3 in Sides BL , BR . 4. Attach Top A to Sides BL , BR and Small Divider D using 9 Allen Key Screws 1 . 5. Use Allen Key 4 to tighten screws.
Assembly Step 11 Model # AXCCON47-MSB Last Step ( after adjust the door ) First Step 7 7 7 11 H BR BL H 8 8 10 1. Attach hinges on Doors H to Sides BL , BR using Phillips Screws 7 into pre-drill holes: - Using Phillips screwdriver to attach Screws 7 at middle hole of hinges for both top & bottom hinges. - Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
Assembly Model # AXCCON47-MSB Step 12 shelf level 1 shelf support anti - tipping shelf level 2 6 shelf level 3 6 1. Use 4 Shelf Supports 6 for each Shelf Cabinet G in desired location. 2. 2 Shelf Supports 6 may be used on back top of each Shelf Cabinets G as a tipping restraint.
Assembly Model # AXCCON47-MSB Step 13 1. Insert assembled drawers into drawer glides on assembled cabinet.
Furniture Tip Over Restraint Assembly WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. Step 14 NOTE: The screwdriver is not included in the hardware pack.
Furniture Anti-Tipping Restraint Instructions 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. 3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the hole and gently tap until the flange on the anchor is against the wall surface.
