TM SIMP HOME ® LIFE BY DESIG N TM CARLTON / RICHLAND / STERLING DRESSER MODEL # AXCCRL44-W 1/23
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
MODEL # AXCCRL44-W PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A . . B C Fron t/A Fron van t t/A van t Front / Ava nt TOP QTY 1 BOTTOM FRAME QTY 1 . . D TOP FRAME QTY 1 . EL Fron ER t/A vant Front Fron vant t/A t/A Fron / Ava nt LEFT SIDE QTY 1 MIDDLE FRAME QTY 1 . RIGHT SIDE QTY 1 . F .
MODEL # AXCCRL44-W PRE-ASSEMBLY INFORMATION PART DESCRIPTION I1 . . . I2 TOP BACK PANEL QTY 1 J BOTTOM BACK PANEL QTY 1 . . K BOTTOM SUPPORT LEG QTY 1 . L ML SMALL DRAWER FRONT QTY 3 LARGE DRAWER FRONT QTY 4 LEFT LAGRE DRAWER SIDE QTY 4 . . MR . NL RIGHT LAGRE DRAWER SIDE QTY 4 LEFT SMALL DRAWER SIDE QTY 3 NR RIGHT SMALL DRAWER SIDE QTY 3 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
MODEL # AXCCRL44-W PRE-ASSEMBLY INFORMATION . PART DESCRIPTION O . . P LARGE DRAWER BACK QTY 4 . Q SMALL DRAWER BACK QTY 3 . R . SL SMALL DRAWER BOTTOM QTY 3 LARGE DRAWER BOTTOM QTY 4 SR LEFT TRAY QTY 1 RIGHT TRAY QTY 1 . T JOINING STRIP QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
MODEL # AXCCRL44-W PRE-ASSEMBLY INFORMATION . HARDWARE DESCRIPTION 1 2 . ALLEN KEY BOLT M6 X 30mm QTY 24 . . 3 CAM LOCK PIN CAM LOCK QTY 28 SETS ALLEN KEY SCREW M6 X 30mm QTY 52 . 4 . 5 HANDLE M4 X 27 mm QTY 7 SETS . 6 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 24 ALLEN KEY QTY 1 . 7 8 PHILLIPS SCREW M4 X 30mm QTY 4 a. M4 X 25mm - QTY 2 ( 1 is extra ) b. M4 X 15mm - QTY 1 c.
MODEL # AXCCRL44-W COMPONENTS-KEY DIAGRAM Fron A t / Av ant C H Fron t / Av ant Front I1 Fron t / Av ant Fron G t / Av ant ER nt F I2 ant D Fron / Ava T t / Av nt G Front EL / Ava Fron Fron t / Av ant B t / Av ant SR J SL P NR NL R L O MR ML Q K 9/23
MODEL # AXCCRL44-W ASSEMBLY STEP-1 NR NL L 3 1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Small Drawer Front L . 2. Align Cam Lock Pins with pre-drilled holes and attach Small Drawer Sides NL , NR . 3. Insert 2 Cam Locks 3 into pre-drilled holes on each Small Drawer Side NL , NR . 4. Use flathead screwdriver secure Cam Locks. STEP-2 R NR NL L 1. Slide Small Drawer Bottom R firmly into slots on Small Drawer Sides NL , NR and Small Drawer Front L .
MODEL # AXCCRL44-W ASSEMBLY STEP-3 P NR 2 R 5 NL L 1. Align Small Drawer Back P with Small Drawer Bottom R and press firmly into slot . 2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on each Side NL , NR . 3. Use Allen Key 5 to tighten screws. Do not over-tighten. STEP-4 NOTE: The screwdriver is not included in the hardware pack. L 4 1. Use Phillips screwdriver to attach Handle 4 to Small Drawer Front L . Repeat Step 1-4 for the other two small drawers .
MODEL # AXCCRL44-W ASSEMBLY STEP-5 MR ML K 3 1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Large Drawer Front K . 2. Align Cam Lock Pins with pre-drilled holes and attach Large Drawer Sides ML , MR . 3. Insert 2 Cam Locks 3 into pre-drilled holes on each Large Drawer Side ML , MR . 4. Use flathead screwdriver secure Cam Locks. STEP-6 MR Q ML K 1. Slide Large Drawer Bottom Q firmly into slots on Large Drawer Sides ML , MR and Large Drawer Front K .
MODEL # AXCCRL44-W ASSEMBLY STEP-7 O MR 2 Q 5 ML K 1. Align Largel Drawer Back O with Large Drawer Bottom Q and press firmly into slot . 2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on each Side ML , MR . 3. Use Allen Key 5 to tighten screws. Do not over-tighten. STEP-8 NOTE: The screwdriver is not included in the hardware pack. K 4 1. Use Phillips screwdriver to attach Handle 4 to Large Drawer Front K . Repeat Step 5-8 for the other three large drawers .
MODEL # AXCCRL44-W ASSEMBLY Front / Avant STEP-9 Front / Avant 2 5 Front / Avant Front / Avant H C 1. Attach Small Divider H to Top Frame C using 3 Allen Key Screws 2 2. Use Allen Key 5 to tighten screws. Do not over-tighten.
MODEL # AXCCRL44-W ASSEMBLY Front / Avant STEP-10 Front / Avant Front / Avant 2 5 Front / Avant Front / Avant Front / Avant Front / Avant H C Front / Avant G G D 1. Attach Middle Dividers G to Top Frame C and Middle Frame D using 12 Allen Key Screws 2 (6 Screws / each Divider ). 2. Use Allen Key 5 to tighten screws. Do not over-tighten.
MODEL # AXCCRL44-W ASSEMBLY Front / Avant STEP-11 2 5 H F Front / Avant Front / Avant Front / Avant C D B 1. Attach Large Divider F to Middle Frame D and Bottom Frame B using 6 Allen Key Screws 2 (3 Screws / each Frame ). 2. Use Allen Key 5 to tighten screws. Do not over-tighten.
MODEL # AXCCRL44-W ASSEMBLY STEP-12 1 5 NOTE: The screwdriver is not included in the hardware pack. C ER Front / Avant H Front / Avant Front / Avant D J Front / Avant EL F 7 B J 1. Attach Top Frame C ,Middle Frame D and Bottom Frame B to Sides EL , ER using 18 Allen Key Bolts 1 ( 9 Bolts / each Side ). 2. Use Allen Key 5 to tighten screws. Do not over-tighten. 3. Attach Bottom Support Leg J to Bottom Frame B using 4 Phillip Screws 7 .
MODEL # AXCCRL44-W ASSEMBLY STEP-13 2 5 1 5 A H Front / Avant Front / Avant F Front / Avant Front / Avant Front / Avant EL ER B 1. Attach Top A to Sides EL , ER using 6 Allen Key Bolts 1 ( 3 Bolts / each Side ). 2. Attach Top A to Divider H using 3 Allen Key Screws 2 . 3. Use Allen Key 5 to tighten screws and bolts. Do not over-tighten.
MODEL # AXCCRL44-W ASSEMBLY STEP-14 Fron t/A vant A 6 I1 EL ER Fron t/A van t T I2 I2 NOTE: The screwdriver is not included in the hardware pack. Fron A t/A vant I1 I2 Fron t/A van t T 1. Attach the upper Back Panel I1 to back frame by using Phillips Screws 6 . Only 1st top row of screws ( 7 screws ) to be screwed in advance. 2. Insert the lower Back Panel I2 into the slot of Joining Strip T . 3.
MODEL # AXCCRL44-W ASSEMBLY STEP-15 SR SL 1. Insert assembled drawers and trays SL , SR into glides on assembled dresser.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-16 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
