Installation Guide

Model # AXCELA06-SMBAssembly
23
Step 15
NOTE: The screwdriver is not
included in the hardware pack.
4 4
6
7
6
7
7
H
H
EL
ER
1. Attach Magnet Plates 6 to
bottom corner of Doors H
using Phillips Screws 7 into pre-drilled holes on Doors H .
2. Attach Magnets 6 using Phillips Screws 7 into pre-drilled holes on Dividers EL , ER .
3. Use Phillips screwdriver to snugly tighten screw. Do not over-tighten.
4. Use Phillips screwdriver to attach Handles 4 to Doors H .