Instructions/Assembly Guide

ASSEMBLY MODEL # AXCLRY-10GW
/2921
STEP-14
NOTE: The screwdriver is not
included in the hardware pack.
J
I
H
J
I
H
I
6
1. Attach the Top Back Panel H to back frame by using Phillips Screws 6 .
Only 1st top row of screws ( six screws ) to be screwed in advance.
2. Insert the Bottom Back Panel I into the slot of Plastic Joining Strip J .
3. Insert the entire set of Step 2 into bottom edge of Top Back Panel H and attach
both panels H , I with screws 6 .
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Warning Label