Installation Guide

Table Of Contents
/2719
ASSEMBLY
MODEL # AXCLRY-12DCB
STEP-14
NOTE: The screwdriver is not
included in the hardware pack.
N
M
N
M
1. Attach the Top Back Panel L to back frame by using Phillips Screws 6 .
Only 1st top row of screws to be screwed in advance.
2. Insert the Bottom Back Panel M into the slot of Plastic Joining Strip N .
3. Insert the entire set of Step 2 into bottom edge of Top Back Panel L and attach
both panels L , M with screws 6 .
L
M
L
Warning Label
6
Front /
Avant
Front /
Avant