SIMP IHOME I L I F E B Y D E S I GN AMHERST / HALIFAX / WASHINGTON MEDIUM STORAGE CABINET MODEL # AXCR AMH15-HI C 1/21
SIMP IHOME I L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
MODEL # AXCRAMH15-HIC PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION B A C Fron t/A van t Fro nt / Ava nt ant t / Av Fron TOP QTY 1 D LEFT SIDE QTY 1 RIGHT SIDE QTY 1 F E Fron t/A van t Fro nt / Ava nt BOTTOM SHELF QTY 1 GL CENTRE SUPPORT QTY 1 GR LEFT BACK PANEL QTY 1 Warning Label RIGHT BACK PANEL QTY 1 DOOR QTY 1 H SHELF QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXCRAMH15-HIC PARTS DESCRIPTION JL I DRAWER FRONT QTY 4 K JR LEFT DRAWER SIDE QTY 4 RIGHT DRAWER SIDE QTY 4 L DRAWER BACK QTY 4 DRAWER BOTTOM QTY 4 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
MODEL # AXCRAMH15-HIC PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 28 4 3 CAM LOCK PIN CAM LOCK QTY 22 SETS 5 HANDLE QTY 5 SETS 7 6 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 17 8 MAGNET AND PLATE QTY 1 SET 10 ALLEN KEY QTY 1 ADJUSTABLE HINGE QTY 2 9 SHELF SUPPORT QTY 12 PHILLIPS SCREW M3 X 15 mm QTY 4 11 a. M4 X 25 - QTY 2 ( 1 is extra ) PHILLIPS SCREW M4 X 15 mm QTY 12 b. M4 X 15 - QTY 1 c.
COMPONENTS – KEY DIAGRAM Fron t/A vant MODEL # AXCRAMH15-HIC A GL GR C E H B F Fron t/A vant Fron t/A vant H Fron t/A vant D Fron t/A vant JR K JL L I 8/21
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 1 JR JL I 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front I . 2. Align Cam Lock Pins with guide holes and attach Drawer Sides JL , JR . 3. Insert 2 Cam Lock 2 into guide holes on each Drawer Side JL , JR . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 L JR JL I 1. Slide Drawer Bottom L firmly into slots on Drawer Sides JL , JR and Drawer Front I .
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 3 K JR L 1 I JL 3 1. Align Drawer Back K with Drawer Bottom L and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through guide holes on each side. 3. Use Allen Key 3 to tighten Screws. Do not over tighten. STEP 4 4 NOTE: The screwdriver is not included in the hardware pack. I 1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front I . Repeat Step 1-4 for the other drawers.
ASSEMBLY MODEL # AXCRAMH15-HIC Front / Avant STEP 5 E Front / Avant D 1 3 1. Attach Centre Support E to Bottom Shelf D using Allen Key Screws 1 through guide holes. 2. Use Allen Key 3 to tighten Screws. Do not over tighten. B C E Front / Avant Front / Avant Front / Avant Front / Avant STEP 6 D 2 1. Attach Cam Lock Pins 2 into pre-drilled holes on each Side B , C . 2. Align and insert Cam Lock Pins 2 into guide holes on Bottom Shelf D . 3.
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 7 Front Side A A E 1 1 3 3 D E Front / Avant Front / Avant B Front / Avant Front / Avant Front / Avant A C 1. Attach Top A to Sides B , C using Allen Key Screws 1 . 2. Attach Top A to Centre Support Shelf E using Allen Key 1 . Tighten the Centre Support Shelf to pre-drill hole at the right side support bar underneath of top. 3. Use Allen Key 3 to tighten Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCRAMH15-HIC Triangle ruler NOTE: The triangle ruler is not included in the hardware pack. ° 90 ° 90 STEP 8 90 ° 90 ° 90 ° 90 90 STEP 9 ° ° 90 ° Adjust the cabinet frame before assembling the back panels. Warning Label ant / Av t n Fro GL 5 GR vant t/A Fron 1. Attach Back Panels GL , GR to back of cabinet using Phillips Screws Round Head 5 into guide holes. 2. Use Phillips screwdriver to tighten screws.
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 10 10 6 F Fron t/A van t A 6 Fron t/A van t Fron t/A van t Fron t/A van t C F 10 B Fron t/A van t 1. Attach Adjustable Hinges 6 to Door F using Phillips Screws 10 into pre-drilled holes on Door F . 2. Attach Adjustable Hinges on Door F to Side C using Phillips Screws 10 into pre-drilled holes on Side C . 3. Use a Phillips screwdriver to tighten screws.
ASSEMBLY MODEL # AXCRAMH15-HIC IMPORTANT NOTE: 10 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 11 A F 4 C E B D 7 9 7 9 1. Attach Magnet Plate 7 to bottom corner of Door F using Phillips Screws 9 into pre-drilled holes on Door F . 2. Attach Magnet 7 using Phillips Screws 9 into pre-drilled holes on Bottom Shelf D . 3. Use a Phillips Screwdriver to attach Handle 4 to Door F .
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 12 shelf level 1 shelf support anti - tipping shelf level 2 8 shelf level 3 H F 8 H H 1. Use 4 Shelf Supports 8 for each Cabinet Shelf H in desired location. 2.
ASSEMBLY MODEL # AXCRAMH15-HIC STEP 13 1. Insert assembled drawers into glides on assembled Medium Storage Cabinet.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 14 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. Drill a 3/16 inch hole in the wall.
SIMP IHOME I L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.