Instructions / Assembly

ASSEMBLY
STEP 3
9/12
STEP 4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front F .
1. Align Drawer Back H with Drawer Bottom I and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen Key 3 to tighten. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
4
MODEL # AXCRGL002-BL
F
GR
GL
I
1
3
H
F