Instructions / Assembly

ASSEMBLY
STEP 3
STEP 4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front G .
1. Align Drawer Back I with Drawer Bottom J and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen key 3 to tighten. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
G
J
HR
HL
I
1
3
4
G
Repeat Step 1-4 for the second drawer.
9/16
MODEL # AXCRWSH01-LGB