WARM SHAKER / NORFOLK / LEXINGTON COFFEE TABLE MODEL # AXWSH001-GR 1/17
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
ENTER TO WIN Upload an image of our furniture in your home with a short review to our facebook page for a chance to Win up to $3000 of Simpli Home furniture!!! www.facebook.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH001-GR PARTS DESCRIPTION B A TOP QTY 1 D C SIDES QTY 1 PAIR F E BOTTOM SHELF QTY 1 G BACK QTY 1 CENTRE DRAWER QTY 1 I H DRAWER FRONT QTY 2 TOP SHELF QTY 1 DRAWER SIDE QTY 2 PAIRS DRAWER BACK QTY 2 J DRAWER BOTTOM QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH001-GR HARDWARE DESCRIPTION 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 26 4 3 CAM LOCK PIN CAM LOCK QTY 18 SETS ALLEN KEY QTY 1 WOOD DOWEL Ø8 X 30 mm QTY 6 Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included 5 HANDLE M4X25 mm QTY 4 SET S NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
MODEL # AXWSH001-GR COMPONENTS – KEY DIAGRAM A E C B F B D I H H J G 7/17
ASSEMBLY MODEL # AXWSH001-GR STEP 1 H H G 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front G . 2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides H . 3. Insert 2 Cam Lock 2 into pre-drilled holes on each Drawer Side H . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 H J H G 1. Slide Drawer Bottom J firmly into slots on Drawer Sides H and Drawer Front G .
ASSEMBLY MODEL # AXWSH001-GR STEP 3 I H J 1 H G 3 1. Align Drawer Back I with Drawer Bottom J and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each side. 3. Use Allen key 3 to tighten. Do not over tighten. STEP 4 4 NOTE: The screwdriver is not included in the hardware pack. G 1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front G . Repeat Step 1-4 for the second drawer.
ASSEMBLY MODEL # AXWSH001-GR STEP 5 1 NOTE: Holes are on the right side. 3 C B 1. Attach Top Shelf C to one Side B using Allen Key Screws 1 through pre-drilled holes.
ASSEMBLY MODEL # AXWSH001-GR STEP 6 4 E C B 2 1. Attach 2 Cam Lock Pins 2 to one Side B using guide holes. 2. Align and insert Cam lock Pins on Side B into pre-drilled holes on Back E . 3. Using a flathead screwdriver tighten Cam Locks into Pins. 4. Use Phillips screwdriver to attach Handle 4 to Back E .
ASSEMBLY MODEL # AXWSH001-GR STEP 7 B E 2 C 1 3 1. To attach opposite Side B to Top Shelf C and Back E , repeat steps 5 - 6.
ASSEMBLY MODEL # AXWSH001-GR STEP 8 1 3 F C 1. Attach Centre Drawer F to Top Shelf C using Allen Key Screws 1 through pre-drilled holes.
ASSEMBLY MODEL # AXWSH001-GR STEP 9 3 1 5 D F B B 1. Insert 2 Dowels 5 into pre-drilled holes on the Centre Drawer F . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Bottom Shelf D to Sides B and Centre Drawer F using Allen Key Screws 1 through pre-drilled holes.
ASSEMBLY MODEL # AXWSH001-GR STEP 10 A 2 5 B B 1. Insert Dowels 5 into each corner of Side B . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach 6 Cam Lock Pins 2 to bottom of Top A . 4. Align and insert Cam Lock Pins on Top A into pre-drilled holes on Sides B . 5. Using a flathead screwdriver tighten Cam Locks into Pins. STEP 11 1. Insert assembled drawer into glides on assembled table. 2.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
Question, problems, missing parts? Before returning your product please email Customer Support at simpli-home.com/customer-support or call Customer Support at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.
