User Manual

Table Of Contents

ASSEMBLY

STEP 3

MODEL # AXWSH001-GR

STEP 4

1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front G .

1. Align Drawer Back I with Drawer Bottom J and press firmly into slot .

2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each side.

3. Use Allen key 3 to tighten. Do not over tighten.

NOTE: The screwdriver is not

included in the hardware pack.

Repeat Step 1-4 for the second drawer.

9/16