User Manual

ASSEMBLY
STEP 3
STEP 4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front F .
1. Align Drawer Back H with Drawer Bottom I and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each side.
3. Use Allen Key 3 to tighten. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
F
I
GR
GL
H
1
3
4
F
9/13
MODEL # AXWSH002-GR