SIMP I I HOME L I F E B Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND MODEL # AXWSH004-GR 1/21
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
SIMP I I HOME L I F E B Y D E S I GN ENTER TO WIN Upload an image of our furniture in your home with a short review to our facebook page for a chance to Win up to $3000 of Simpli Home furniture!!! www.facebook.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH004-GR PARTS DESCRIPTION A B nt Fro e d Si ck Ba e Sid nt Fro e Sid TOP QTY 1 C SIDES QTY 1 PAIR D E ck Ba e Sid CENTRE SHELF QTY 1 F nt Fro e d Si BOTTOM SUPPORT QTY 1 SHELF SIDE QTY 1 PAIR G DOOR QTY 1 PAIR I H nt Fro e Sid CENTRE DRAWER GLIDE QTY 1 J SHELF QTY 2 SHELF CABINET QTY 2 L K BACK PANEL QTY 1 M BACK PANEL QTY 2 O N DRAWER FRONT QTY 2 DRAWER SIDE QTY 2 PAIRS BACK PANEL QTY 1 P DRAWER BACK QTY 2 DRAWER BOTTOM QTY 2 NEED
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 2 1 3 CAM LOCK PIN CAM LOCK QTY 16 SETS ALLEN KEY SCREW M6 X 30 mm QTY 32 5 PHILLIPS SCREW M4 X 15 mm QTY 24 7 6 8 a. M4 x 25mm - QTY 1 b. M4 x 15mm - QTY 1 c.
COMPONENTS – KEY DIAGRAM MODEL # AXWSH004-GR A K K J E E B H I L B I F H F C G D O N N P M 7/21
ASSEMBLY MODEL # AXWSH004-GR STEP 1 N N M 2 1. Attach 4 Cam Lock Pins 2 to back of Drawer Front M . 2. Align and insert Cam Lock Pins into pre-drilled holes on Drawer Sides N . 3. Insert 2 Cam Lock 2 into pre-drilled holes on each Drawer Side N . 4. Use flathead screwdriver to secure Cam Locks. STEP 2 N P N M 1. Slide Drawer Bottom P firmly into slots on Drawer Sides N and Drawer Front M .
ASSEMBLY MODEL # AXWSH004-GR STEP 3 O N P 1 N M 3 1. Align Drawer Back O with Drawer Bottom P and press firmly into slot . 2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each side. 3. Use Allen Key 3 to tighten. Do not over-tighten. STEP 4 8 NOTE: The screwdriver is not included in the hardware pack. M 1. Use Phillips Screwdriver to attach Handle 8 to Drawer Front M . Repeat Step 1-4 for the second drawer.
ASSEMBLY MODEL # AXWSH004-GR 3 STEP 5 1 C E E 1. Attach Shelf Sides E to Bottom Shelf C using four Allen Key Screws 1 through pre-drilled holes. 2. Use Allen Key 3 to tighten. Do not over-tighten. STEP 6 2 B C 1. Attach three Cam Lock Pins 2 to one Side B using guide holes. 2. Align and insert Cam Lock Pins on Side B into pre-drilled holes on Bottom Shelf C . 3. Place three Cam Locks 2 into pre-drilled holes in Bottom Shelf C . 4. Using a flathead screwdriver tighten Cam Locks into Pins.
ASSEMBLY MODEL # AXWSH004-GR STEP 7 2 C B 1. To attach Opposite Side B to Bottom Shelf C , repeat steps 1 - 4 in Step 6. STEP 8 G 2 G C 1. Attach two Cam Lock Pins 2 to bottom of Bottom Shelf C using guide holes in centre. 2. Align and insert pins into Centre Drawer Glide G . 3. Insert two Cam Locks 2 into pre-drilled holes on Centre Drawer Glide G . 4. Using a flathead screwdriver tighten Cam Locks into Pins.
ASSEMBLY MODEL # AXWSH004-GR STEP 9 3 1 D G 3 B 1 B 1. Attach Bottom Support D to Sides B and Centre Drawer Glide G using Allen Key Screws 1 through pre-drilled holes. 2. Use Allen Key 3 to tighten. Do not over-tighten.
ASSEMBLY MODEL # AXWSH004-GR STEP 10 1 3 11 A B E 1 3 E B 1. Insert two Dowels 11 into top corners of each Side B . 2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Align pre-drilled holes on bottom corners of Top A with Dowels 11 in Sides B . 4. Insert Dowels into top. 5. Using Allen Key Screws 1 attach Top A to Sides B and to Shelf Sides E .
ASSEMBLY MODEL # AXWSH004-GR STEP 11 4 12 F A F B 12 F B 4 1. Attach Adjustable Hinges 12 to Doors F using Phillips Screws 4 into guide holes on Doors F . 2. Attach Adjustable Hinges on Doors F to Sides B using Phillips Screws 4 into guide holes on Sides B . 3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH004-GR IMPORTANT NOTE: 4 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXWSH004-GR STEP 12 8 A F 6 B E C F B 5 5 6 1. Attach Magnet Plates 6 to bottom corner of Doors F using Phillips Screws 5 into guide holes on Doors F . 2. Attach Magnet 6 using Phillips Screws 5 into guide holes on Centre Shelf C . 3. Use a Phillips screwdriver to attach Handles 8 to Doors F .
ASSEMBLY MODEL # AXWSH004-GR STEP 13 K J 9 L K 1. Using Phillips Round Head Screws 9 attach Back Panels J K L to back of TV Stand. STEP 14 I H H I 7 1. Use Shelf Supports 7 for each Shelf H or I in desired location. 2. Two Shelf Supports 7 may be used on back top of each Shelf H or I as a tipping restraint.
FURNITURE ANTI-TIPPING RESTRAINT ASSEMBLY NOTE: Injuries and damage can occur from furniture tip-over. It is important to use the safety bracket included. If the tipping restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. NOTE: The screwdriver is not included in the hardware pack.
FURNITURE ANTI-TIPPING RESTRAINT ASSEMBLY Furniture Anti-Tipping Restraint Instructions: 1. 2. 3. 4. 5. 6. 7. 8. ● ● Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. Drill a 3/16 inch hole in the wall.
SIMP I I HOME L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
SIMP I I HOME L I F E B Y D E S I GN Question, problems, missing parts? Before returning your product please email Customer Support at simpli-home.com/customer-support or call Customer Support at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.