WARM SHAKER / NORFOLK / LEXINGTON MEDIUM STORAGE & MEDIA CABINET MODEL # AXWSH005-TB 1/18
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
ENTER TO WIN Upload an image of our furniture in your home with a short review to our facebook page for a chance to Win up to $3000 of Simpli Home furniture!!! www.facebook.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH005-TB PARTS DESCRIPTION B A C nt Fro e Sid ck Ba e Sid ck Ba e Sid nt Fro e Sid nt Fro e Sid ck Ba e Sid TOP QTY 1 D SIDE QTY 1 PAIR E CENTRE SUPPORT QTY 1 ck Ba e Sid F nt Fro e d Si nt Fro e Sid DOOR QTY 1 PAIR G BOTTOM SHELF QTY 1 I H DIVIDER QTY 1 TOP SHELF QTY 1 CABINET SHELF QTY 2 BACK PANEL QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH005-TB HARDWARE DESCRIPTION 2 3 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 8 4 CAM LOCK PIN CAM LOCK QTY 12 SETS 5 PHILLIPS SCREW M4 X 15 mm QTY 24 7 6 8 a. M4 x 25mm - QTY 1 b. M4 x 15mm - QTY 1 c.
MODEL # AXWSH005-TB COMPONENTS – KEY DIAGRAM A G F C I H B B I H D E D 7/18
ASSEMBLY MODEL # AXWSH005-TB STEP 1 F C E 1 2 3 1. Attach Bottom Shelf E to Centre Support C with Allen Key Screws 1 through pre-drilled holes. 2. Attach Cam Lock Pins 2 to Top Shelf F using guide holes. 3. Align Cam Lock Pins 2 and insert into pre-drilled holes on Centre Support C . 4. Insert 2 Cam Locks 2 into pre-derilled holes in Centre Support C . 5. Once in place tighten Cam Locks 2 using a flathead screwdriver.
ASSEMBLY MODEL # AXWSH005-TB STEP 2 B F C E 2 2 2 2 2 1. Attach Cam Lock Pins 2 into guide holes on Side B ( 3 Cam Lock Pins for the bottom and 2 for the top ). 2. Align Cam Lock Pins 2 with pre-drilled holes of Bottom Shelf E and Top Shelf F . 3. Insert Cam Locks 2 into pre-drilled holes of Bottom Shelf E and Top Shelf F . 4. Once in place tighten Cam Locks 2 using a flathead screwdriver.
ASSEMBLY MODEL # AXWSH005-TB STEP 3 2 B F C E B 2 1. To attach opposite Side B to Bottom Shelf E and Top Shelf F repeat steps 1 - 4 in step 2.
ASSEMBLY MODEL # AXWSH005-TB STEP 4 A G F B B 11 11 1 3 1. Insert 2 Wood dowels 11 into corner of each Side B . 2. Insert 6 Wood dowels 11 into Divider G . 3. Use rubber mallet to tap Dowels 11 into bottom of holes securely. ½ length of Dowels should be exposed. 4. Align Dowels 11 with pre-drilled holes in centre of Top Shelf F and insert firmly. 5. Align pre-drilled holes on bottom of Top A with Dowels on Sides B and Top Centre G . 6. Firmly insert Dowels 11 into part A . 7.
ASSEMBLY MODEL # AXWSH005-TB STEP 5 4 12 D 12 B 4 B D D 1. Attach Adjustable Hinges 12 to Doors D using Phillips Screws 4 into guide holes on Doors D . 2. Attach Adjustable Hinges on Doors D to Sides B using Phillips Screws 4 into guide holes on Sides B . 3. Use a Phillips screwdriver to tighten screws.
ASSEMBLY MODEL # AXWSH005-TB IMPORTANT NOTE: 4 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXWSH005-TB STEP 6 8 A B 6 C B E D 5 D 5 6 1. Attach Magnet Plates 6 to inside corners of Doors D using Phillips Screws 5 into guide holes on Doors D . 2. Attach Magnet 6 to inside corner of Bottom Shelf E using Phillips Screws 5 into guide holes on Bottom Shelf E . 3. Use a Phillips screwdriver to attach Handles 8 to Doors D .
ASSEMBLY MODEL # AXWSH005-TB STEP 7 I 9 I 1. Attach Back Panels I to back of cabinet using Phillips Screws Round Head 9 into pre-drilled guide holes. 2. Use Phillips screwdriver to tighten screws. STEP 8 H 7 1. Use 4 Shelf Supports 7 for each Cabinet Shelf H in desired location. 2. 2 Shelf Supports 7 may be used on back top of each Cabinet Shelf H as a tipping restraint.
ASSEMBLY MODEL # AXWSH005-TB NOTE: Injuries and damage can occur from furniture tip-over. It is important to use the safety bracket included. If the tipping restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP 9 NOTE: The screwdriver is not included in the hardware pack. 10 10 1. To attach Tipping Restraint 10 , follow instructions on Tipping Restraint package.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
Question, problems, missing parts? Before returning your product please email Customer Support at simpli-home.com/customer-support or call Customer Support at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.