WARM SHAKER / NORFOLK / LEXINGTON ENTRYWAY STORAGE BENCH MODEL # AXWSH006-TB 1/17
FOR REPLACEMENT PARTS OR HELP WITH ASSEMBLY PLEASE CONTACT US AT: simpli-home.
ENTER TO WIN Upload an image of our furniture in your home with a short review to our facebook page for a chance to Win up to $3000 of Simpli Home furniture!!! www.facebook.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH006-TB PARTS DESCRIPTION B A C ck Ba e Sid ide tS n o Fr nt Fro e Sid SIDE QTY 1 PAIR SEAT QTY 1 D BOTTOM SHELF QTY 1 F E ck Ba e Sid nt Fro e Sid DIVIDER QTY 1 PAIR G DOOR QTY 3 I H CABINET SHELF QTY 1 BACK QTY 1 CABINET SHELF QTY 1 PAIR BOTTOM SUPPORT LEG QTY 1 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 2 1 3 2 ALLEN KEY SCREW M6 X 30 mm QTY 20 4 3 CAM LOCK PIN CAM LOCK QTY 4 SETS 5 HANDLE M4 X 25 mm QTY 3 SET S 7 ALLEN KEY QTY 1 6 PHILLIPS SCREW M3 X 15 mm QTY 12 WOOD DOWEL Ø8 X 30 mm QTY 8 8 PHILLIPS SCREW M4 X 15 mm QTY 36 10 MODEL # AXWSH006-TB 9 MAGNET AND PLATE QTY 3 SETS SHELF SUPPORT QTY 18 ADJUSTABLE HINGE QTY 6 SETS Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included 11 PHILLIPS SCREW M4 X 30 mm QTY 4
MODEL # AXWSH006-TB COMPONENTS – KEY DIAGRAM B F A D D A E E E G H H C I 7/17
ASSEMBLY MODEL # AXWSH006-TB STEP 1 1 A 3 B F 5 2 1. Insert four Dowels 5 into pre-drilled holes in the Back F . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Seat B to Side A using Allen Key Screws 1 through pre-drilled holes on Back F . 4. Attach two Cam Lock Pins 2 to one Side A using guide holes. 5. Align and insert Cam Lock Pins on Side A into pre-drilled holes on Back F . 6.
ASSEMBLY MODEL # AXWSH006-TB STEP 2 1 3 A B F A 5 2 1. To attach opposite Side A to Seat B and Back F , repeat steps 1.
ASSEMBLY MODEL # AXWSH006-TB STEP 3 3 1 1 3 A D B D A 1. Attach Dividers D to Seat B using Allen Key Screws 1 through pre-drilled holes.
ASSEMBLY MODEL # AXWSH006-TB STEP 4 5 A D D C A I 1 3 10 1. Insert two Wood dowels 5 into pre-drilled holes on each Divider D . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 4. Attach Bottom Shelf C to Sides A and Dividers D using Allen Key Screws 1 through pre-drilled holes. 5. Attach Bottom Support Leg I into pre-drilled holes of Bottom Shelf C using four Phillips Screws 10 . 6. Use Phillips screwdriver to tighten Screws.
ASSEMBLY MODEL # AXWSH006-TB STEP 5 7 11 E A E 11 7 A E E 1. Attach Adjustable Hinges 11 to Doors E using Phillips Screws 7 into guide holes on Doors E . 2. Attach Adjustable Hinges on Doors E to Sides A using Phillips Screws 7 into guide holes on Sides A . 3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH006-TB IMPORTANT NOTE: 7 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXWSH006-TB STEP 6 4 6 8 A B E C E A 8 E 6 1. Attach Magnet Plates 8 to bottom corner of Doors E using Phillips Screws 6 into guide holes on Doors E . 2. Attach Magnet 8 using Phillips Screws 6 into guide holes on Bottom Shelf C . 3. Use a Phillips screwdriver to attach Handles 4 to Doors E .
ASSEMBLY MODEL # AXWSH006-TB STEP 7 H G H 9 1. Use four Shelf Supports 9 for each Shelf G or H in desired location. 2. Two Shelf Supports 9 may be used on back top of each Shelf G or H as a tipping restraint.
WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
Question, problems, missing parts? Before returning your product please email Customer Support at simpli-home.com/customer-support or call Customer Support at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST For more information visit us on our website www.simpli-home.com Like us on facebook www.facebook.
