Instructions / Assembly

ASSEMBLY
8/17
1. Insert four Dowels 5 into pre-drilled holes in the Back F .
2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Seat B to Side A using Allen Key Screws 1 through pre-drilled holes
on Back F .
4. Attach two Cam Lock Pins 2 to one Side A using guide holes.
5. Align and insert Cam Lock Pins on Side A into pre-drilled holes on Back F .
6. Insert two Cam Locks 2 into pre-drilled holes on Back F .
7. Using a flathead screwdriver to tighten Cam Locks into Pins.
A
F
B
5
2
1
3
STEP 1
MODEL # AXWSH006-TB