SIMP HOME I ® I L I F E B Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON ENTRYWAY STORAGE BENCH MODEL # AXWSH006-W 1/16
SIMP HOME I I ® L I F E B Y D E S I GN Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am – 4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION MODEL # AXWSH006-W PARTS DESCRIPTION AL B AR nt / Fro nt / Fro Fron t/A van t nt Ava LEFT SIDE QTY 1 nt / Fro SEAT QTY 1 RIGHT SIDE QTY 1 DL C nt Ava DR nt Ava Fron t/A van t BOTTOM SHELF QTY 1 E LEFT DIVIDER QTY 1 F RIGHT DIVIDER QTY 1 BACK QTY 1 HR LEFT CABINET SHELF QTY 1 nt Ava G DOOR (L&R Same) QTY 3 HL nt / Fro RIGHT CABINET SHELF QTY 1 CABINET SHELF QTY 1 I BOTTOM SUPPORT LEG QTY 1 NEED HELP? For help with assembly or if you are missing a p
PRE-ASSEMBLY INFORMATION MODEL # AXWSH006-W HARDWARE DESCRIPTION 2 3 1 2 ALLEN KEY SCREW M6 X 30 mm QTY 20 4 3 CAM LOCK PIN CAM LOCK QTY 4 SETS 5 HANDLE M4 X 25 mm QTY 3 SETS 7 6 PHILLIPS SCREW M3 X 15 mm QTY 12 WOOD DOWEL Ø8 X 30 mm QTY 8 8 PHILLIPS SCREW M4 X 15 mm QTY 36 10 ALLEN KEY QTY 1 9 MAGNET AND PLATE QTY 3 SETS SHELF SUPPORT QTY 18 ADJUSTABLE HINGE QTY 6 SETS Required Flathead screwdriver Phillips screwdriver Rubber mallet Not Included 11 PHILLIPS SCREW M4 X 30 mm QTY 4
COMPONENTS – KEY DIAGRAM Fron t/A vant MODEL # AXWSH006-W B Fron t/A vant F Fron t/A vant Fron t/A vant Fron t/A vant DL AL E AR DR E G HL Fron t/A vant E HR C I 7/16
ASSEMBLY MODEL # AXWSH006-W STEP 1 3 Front / Avant AL Front / Avant 1 B F 5 2 1. Insert four Dowels 5 into guide holes in the Back F . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 3. Attach Seat B to Left Side AL using Allen Key Screws 1 through guide holes on Back F . 4. Attach two Cam Lock Pins 2 to Left Side AL using pre-drilled holes. 5. Align and insert Cam Lock Pins on Left Side AL into guide holes on Back F . 6.
ASSEMBLY MODEL # AXWSH006-W STEP 2 1 Front / Avant AL Front / Avant 3 B Front / Avant F AR 5 2 1. To attach Right Side AR to Seat B and Back F , repeat steps 1.
ASSEMBLY MODEL # AXWSH006-W STEP 3 3 B DR Front / Avant DL Front / Avant Front / Avant AL 1 Front / Avant 1 Front / Avant 3 AR 1. Attach Dividers DL , DR to Seat B using Allen Key Screws 1 through guide holes.
ASSEMBLY MODEL # AXWSH006-W Front / Avant DL Front / Avant Front / Avant 5 Front / Avant Front / Avant AL Front / Avant STEP 4 DR C AR I 1 3 10 1. Insert two Wood dowels 5 into guide holes on each Divider DL , DR . 2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of Dowels should be exposed. 4. Attach Bottom Shelf C to Sides AL , AR and Dividers DL , DR using Allen Key Screws 1 through guide holes. 5.
ASSEMBLY MODEL # AXWSH006-W STEP 5 7 11 E AL nt / Fro E 11 7 nt Ava AR E E nt / Fro nt Ava 1. Attach Adjustable Hinges 11 to Doors E using Phillips Screws 7 into pre-drilled holes on Doors E . 2. Attach Adjustable Hinges on Doors E to Sides AL , AR using Phillips Screws 7 into pre-drilled holes on Sides AL , AR . 3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWSH006-W IMPORTANT NOTE: 7 II I Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so that all the spaces between the door and the unit sides are equal. To adjust, follow instructions: 1. Side adjustment 4 mm To move the door towards the side panel, loosen screw I and tighten screw II . To move the door away from the side panel, loosen screw II and tighten screw I . 2.
ASSEMBLY MODEL # AXWSH006-W STEP 6 4 6 8 AL B E C E AR 8 E 6 1. Attach Magnet Plates 8 to bottom corner of Doors E using Phillips Screws 6 into pre-drilled holes on Doors E . 2. Attach Magnets 8 using Phillips Screws 6 into pre-drilled holes on Bottom Shelf C . 3. Use a Phillips screwdriver to attach Handles 4 to Doors E .
ASSEMBLY MODEL # AXWSH006-W STEP 7 HL G HR 9 1. Use four Shelf Supports 9 for each Shelf G or HL , HR in desired location. 2. Two Shelf Supports 9 may be used on back top of each Shelf G or HL , HR as a tipping restraint.
SIMP HOME I I ® L I F E B Y D E S I GN WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.
