User manual

9
Generac Portable Products 2000 PSI High Pressure Washer
 Turn ON the water (open valve completely).
 Squeeze trigger on gun to purge pump system of
air and impurities.
CAUTION! Before starting the pressure
washer, be sure you are wearing adequate
eye protection.
 Attach nozzle extension to spray gun. Tighten by
hand (Figure 9).
CHECKLIST BEFORE
STARTING ENGINE
Look back over the assembly to see if you have
performed all of the following:
 Check for properly tightened hose connections
(high pressure and water supply) and for tight
connections and that there are no kinks, cuts, or
damage to the high pressure hose.
 Check that oil has been added to proper level in
engine crankcase before trying to start the pressure
washer.
 Add proper gasoline to fuel tank.
 Provide proper water supply (not to exceed 140°F).
 Be sure to read Safety Rules and Operation
sections before using the pressure washer.
Figure 9  Connect nozzle extension to spray gun.
Figure 8  Connect the garden hose to water inlet and
turn ON the water.
Check Screen for Damage