User manual
9
Features and Controls
Read this Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
A - Warning Tag — Identies hazards with pressure
washer.
B - Nozzle Extension with Quick Connect — Allows
you to switch between three dierent spray tips.
C - Spray Tips — Detergent, 0°, and 25°: for various
high pressure cleaning applications.
D - Recoil Starter — Used for starting the engine
manually.
E - Oil Fill/ Dipstick — Check, add and drain engine
oil here.
F - Pump — Develops high pressure.
G - Automatic Cool Down System — Cycles water
through pump when water reaches above 51° C
(125° F). Warm water will discharge from pump
onto ground to prevents internal pump damage.
H - Detergent Siphoning Tube — Use to siphon
pressure washer safe detergents into the low
pressure stream.
J - Air Filter — Protects engine by ltering dust and
debris out of intake air.
K - Primer Bulb — Prepares a cold engine for
starting.
L - Engine Stop Switch — Push this switch to ON (I)
position before using recoil starter. Push switch to
OFF (0) position for shutting o engine.
M - Fuel Tank — Fill tank with regular unleaded fuel.
Always leave room for fuel expansion.
N - High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
P - Accessory Tray — Provides convenient storage
for nozzle extension, spray gun and high pressure
hose.
R - Spray Gun — Controls the application of water
onto cleaning surface with trigger device. Includes
trigger lock.
Items Not Shown:
Identication Label (near rear of base plate) —
Provides model and serial number of pressure washer.
Please have these readily available if calling for
assistance.
High Pressure Outlet — Connection for high
pressure hose.
Water Inlet — Connection for garden hose.
H
B
D
A
C
M
P
R
N
E
L
K
J
F
,
G