Specifications

I.B. ATS-I005
Page 33
Effective 6/00
accessed from the rear of the unit.
Step 6: Carefully lay the screws aside for later use.
Step 7: Mount the replacement unit.
Step 8: Reverse the procedure outlined in Steps 4
and 5.
Step 9 Using the sketch mentioned in Step 3, replace
each wire at the correct terminal, and make
sure each is secure. Make certain that each
plug is securely seated
Step 10: Restore control power.
6.6 MAINTENANCE AND CARE
The IQ Transfer is designed to be a self contained and
maintenance free unit. The printed circuit boards are
calibrated and conformally coated at the factory. They
are intended for service by factory trained personnel
only.