User`s guide

AN0821

10 Rev. 0.1

6. Next, configure ADC 0 to acquire 8-bit samples on P1.2, the potentiometer pin, on Timer 2 overflow:

a. Select ADC 0 from the Analog group.

b. Set the Enable ADC property to Enabled.

c. Set the Start of Conversion property to Timer 2 overflow.

d. Set the Positive Input Selection property to ADC0.10 (P1.2).

e. Set the Resolution property to 8-bit.

f. Set the Enable 8-bit Mode property to 8-bit mode.

g. Set the Gain Control property to 1x gain.