Operating instructions

141
MAINTENANCE PRODUCTS
CLEANING WITH SPRAYNET
Cleaning spray for instruments and appliances.
Dissolves impurities. Follow the recommendations given
in the instructions for use supplied with each instrument.
New, even more effective lubricating solution. It extends the service
life of your instruments and ensures they operate correctly. Follow
the recommendations given in the instructions for use supplied with
each instrument.
LUBRICATION WITH LUBRIFLUID
Lubricate before each sterilization
or at least twice a day.
Lubricate with the standard nozzle for hand-
pieces, contra-angles and turbines with
ball bearings: squirt for 1 second through
the back of the instruments.
Standard nozzle and small adapter
for brushless motors and air motors.
Lubricate air motors via the back
of the appliance for 0.5 to 1 second.
Important note
Unsuitable for non-sterilizable brush motors.
For more details, please refer to the operating instructions
for the instruments and devices.
For more details, please refer to the operating instructions
for the instruments and devices.
Internal cleaning
Warning: Any instrument cleaned
internally with Spraynet must always
be relubricated before storage
or sterilization. See maintenance
instructions. This procedure will ensure
that the instrument runs well during
each operation and for many years.
External cleaning
It is recommended that a clean
cloth sprayed with Spraynet is used
to clean and maintain the surfaces
of hoses, cables, non-waterproof
equipment and housings and electric
motors. Direct spraying is perfectly
suitable for all contra-angles, hand-
pieces, turbines and air and brushless
electric motors.