Operating instructions

143
MAINTENANCE PRODUCTS
Lubrimed
Medical grease for ball-bearing turbines,
except Eolia.
Box of 6 cartridges
Ref. 1600037-006
Lubrimed greaser
For ball-bearing turbines, except Eolia
Ref. 1000003-001
Cleaning wire
For unblocking the spray ducts
of turbines, contra-angles and handpieces.
Box of 10
Ref. 1000001-010
LUBRIMED MEDICAL GREASE
Medical grease for turbines with ball bearings.
Packed in boxes of 6 cartridges. Turbines are lubricated using
the Lubrimed greaser.
IMPORTANT: unsuitable for Eolia turbines.
For more details, please refer to the operating instructions
for the instruments and devices.
Lubricate before each sterilization or at least
twice a day.
Remove the bur and insert the tip of
the greaser as far as it will go. The dose
required corresponds to a half-turn
of the knurled rear section. Use the refer-
ence marks.
First-time use:
Remove the cap and rotate the knurled
rear section until grease appears at the tip.
Wipe off excess grease and put the cap
back on after use.