Operating instructions

31
PNEUMATIC CONTROLS
Simple and efficient table control with a large tank, fitted
with the TDS 890 straight turbine.
Specifications:
- controls the TDS 890 turbine with spray
- turbine speed up to 300,000 rpm
- turbine ideal for delicate, precise work
- large 1.4 liter tank
- air/water mixture plus adjustable spray flow rate
- manual spray switch
- pedal to adjust turbine speed and activate spray
- straight hose in grey silicone, 4-way coupling
- reliability under all conditions
- allows machining of ceramic and zirconia
STS-Trimmer unit with spray
1 STS -Trimmer unit with spray ref. 1600643-001
1 TDS 890 turbine with internal spray ref. 1600163-001
1 pedal ref. 1600312-001
1 straight hose with 4-way coupling ref. 1600390-001
Ref. 1700296-001
LABORATORY CONTROLS
Particularly robust and simple to use, Bien-Air pneumatic units
and their TD and TDS turbines provide the optimum response to the
demands of ceramics and prosthetics specialists.
Ideal for delicate, precise work, robust and simple to use, these units
are unrivalled.
The STS Trimmer unit stands out due to its superior qualities. Fitted
with a 1.4 liter tank, it can operate autonomously for significant
periods. Controlled by separate switches, the flow rate and the air/water
spray mixture can be finely adjusted for optimum cooling.
In combination with turbines fitted with a dustproof shield and Friction
Grip chuck, Bien-Air pneumatic assemblies offer you the best...
over the long-term.
STS-TRIMMER PNEUMATIC CONTROL
WITH SPRAY
Controls the TDS 890
with internal spray
Switch for spray
1.4 liter tank
Fine air/water dosage
Dustproof shield