Specifications

About The Maxum II, Continued
The regulator tower contains space for six gauges and regulators. The
base Maxum II Modular Oven includes an electronics enclosure fast
purge gauge and regulators to support the configuration. See the custom
documentation drawing package that was shipped with the analyzer to
see which gauges and regulators are mounted on the analyzer.
Regulator Panel
The Maxum ll has a wide variety of oven configurations. These include
the modular oven, air bath ovens (both single and split), and airless
ovens. Airbath and airless configurations are described in the
Maintenance Manual for those configurations (2000596-001). The
isothermal modular oven is described below.
Isothermal Oven
Oven Configurations
Two different isothermal modular ovens are available, large and small.
The Maxum II Modular Oven compartment may contain up to two
individual isothermal modular ovens in any configuration (two large, two
small, or a large and small). The large oven may be equipped with
either a double application module or up to 2 single application
modules. The small oven may be equipped with a single application
module.
Application modules are self-contained analytical configurations, which
are available in either single or double sizes. Each size may be
equipped with a varying configuration of Model 50 valves, thermistor
beads, and columns plumbed in various ways. Refer to the site specific
application drawings to determine the configuration and plumbing
relevant for a specific analyzer. The application modules are designed
to be easily removed and inserted in the modular oven for ease of
maintenance. This is achieved through the use of a manifold in the
modular oven that provides all electrical and plumbing connections.
A5E31405710001 1-13