Specifications

Control Interface Module, Continued
Other than the external Ethernet connection on the CAC3, CIMBase
board provides all of the connections for the CIM assembly, External
connectors are shown below.
CIMBase Board
Connections
Figure 2-4: CIM Connections
• Debug Connector – This serial RS-232 port is used to interface
to the debug function on the CAC3. The debug port has no
support for hardware handshake.
• CIM Display Control – This connection is for the software control
of the color CIM display panel.
• Alarm/Power LEDs – Interface to the Purge, Fault, Warning, and
Power indicator LEDs that are built into the display panel.
• Touch Screen Interface – Control connection for the touch
screen panel.
• Walk-up Ethernet – This is a spare 10BaseT RJ-45 Ethernet
connection that can be used for direct connection to PC. It is
auto-negotiating to either 10 Mb or 100 Mb.
• Network Ethernet Connection – This connector on the CAC3
board connects directly to the customer LAN.
2-6 A5E31405710001