Specifications

Screen Characteristics, Continued
The status bar shows various data about the analyzer, including the
name, date and time, and run/hold status. It also shows information
about the current application, stream, method, and cycle clock. In
addition, the status bar contains gray buttons that permit the user to
change the run/hold status or to select the current analyzer, stream,
application, and method.
Status Bar
The middle part of the screen is the general content area. It contains
menu lists or parameters with the applicable values, as well as alarm
messages and operator hints. The content area is where the primary
information for a selected screen is displayed. The top left of the content
area is usually a general name or description of the screen.
Content Area
The toolbar allows the user to navigate directly to commonly used
screens. This includes access to the alarm screen as well as settings for
valves, temperature, pressure and streams. It also allows the user to
navigate to the different menu levels (monitor, maintenance, and
configure).
Toolbar
The softkey bar appears at the lower edge of the screen. Its gray
background distinguishes it from the content area. The softkey bar
associates different actions with the softkeys located below the screen.
The actions vary depending on the screen shown.
The Softkey Bar
A5E31405710001 3-5