Specifications

Password Restrictions, Continued
Passwords can be modified from the User’s Passwords screen on the
Configure menu. To change a password you must be logged on with
“Super” level access. To change a password, select the table entry for
the user and then tap (click) the “SELECT” softkey. This will display a
window to modify the password.
Obtaining/Changing a
Password
If your password is accepted you can modify any menu items or
parameters assigned to your user level (or lower user levels). There are
six predefined user levels (levels 0-4 and 99). The items that can be
modified at these user levels are predefined and cannot be changed by
the user.
Privilege
By default six users are defined. These are “public”, “operate”,
“calibrate”, “maintain”, “configure”, and “super”. The default access level
for each of these users matches their names. In addition, multiple
individual users may be defined. These users must have unique names
and they can be created with either “operate”, “calibrate”, “maintain”, or
“configure” access levels. Creation and deletion of users must be
performed using the workstation software. (Refer to the System Manager
chapter of this manual for instructions on creating and deleting users).
The change privilege remains in effect if the user presses any key before
the timeout limit (default 60 minutes). In this manner the user does not
have to re-enter a password repeatedly while browsing through menu
screens. However, the analyzer automatically logs out (back to the
default user), if the user has not pressed a key within the timeout limit.
A5E31405710001 3-11