Parts Manual Large Frame Walk-Behind Snowthrowers 9.5HP Snowthrowers Mfg. No. Description 1694867 1694914 9560E, 9.5HP Snowthrower 9560EX, 9.5HP Snowthrower (CE) 10.5HP Snowthrowers Mfg. No. Description 1694847 1694848 10560E, 10.5HP Snowthrower 10560EX, 10.5HP Snowthrower (CE) 11.5HP Snowthrowers Mfg. No. Description 1694849 1694850 11570E, 11.5HP Snowthrower E11570, 11.5HP Snowthrower (CE) 13HP Snowthrowers Mfg. No.
Table Of Contents PRODUCT COMPONENTS PAGES Handles and Controls Group - Channel .............................................................................................................. Handles and Controls Group ............................................................................................................................... Engine and Frame Group ....................................................................................................................................
Handles and Controls Group - Channel 987044 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 8 4 12 9 5 3 13 7 6 14 15 16 17 18 19 69 71 72 20 4 12 22 4 64 56 6 9 24 12 21 66 23 5 4 70 69 68 28 25 26 38 30 31 67 65 63 Shift rod assembly (Ref.
Handles and Controls Group - Channel REF NO PART NO.
Handles and Controls Group - Channel 987044 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 8 4 12 9 5 3 13 7 6 14 15 16 17 18 19 69 71 72 20 4 12 22 4 64 56 6 9 24 12 21 66 23 5 4 70 69 68 28 25 26 38 30 31 67 65 63 Shift rod assembly (Ref.
Handles and Controls Group - Channel REF NO PART NO. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 1960518 1960252 1960294 1725283 1668186 1611911 1931333 1960684 1723967 1923341 1724037 1960685 2172434 1725439 1728968 2825094 1722460 1666255 1931317 1726304 1728114 1713844 1714120 1960705 1668681 1668524 1924361 1674567 1960074 QTY.
Handles and Controls Group 987161 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 8 Apply adhesive to secure grips. 9 10 12 11 15 5 Must slide freely in dash assembly (Ref 18). Apply lubricant as required. 22 16 6 14 17 23 13 3 21 20 Insert shift rod (Ref. 65) into outter hole of Ref. 68.
Handles and Controls Group REF NO PART NO.
Handles and Controls Group 987161 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 8 Apply adhesive to secure grips. 9 10 12 11 15 5 Must slide freely in dash assembly (Ref 18). Apply lubricant as required. 22 16 6 14 17 23 13 3 21 20 Insert shift rod (Ref. 65) into outter hole of Ref. 68.
Handles and Controls Group REF NO PART NO. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 1727088 1718793 1960518 1960252 1960294 1611911 1931333 1960684 2816168 1668186 1725283 1718593 1918452 1722460 1666255 1960685 1931317 1726304 1726734 1960705 1668523 1924361 1668524 1720240 1715123 1960074 1668185 1960686 QTY.
Engine and Frame Group 987035 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 18 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end onto the tube handle capscrew (Ref. 20). 16 20 11 21 22 23 14 8 10 24 25 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6).
Engine and Frame Group REF NO PART NO. QTY.
Engine and Frame Group 987035 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 18 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end onto the tube handle capscrew (Ref. 20). 16 20 11 21 22 23 14 8 10 24 25 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6).
Engine and Frame Group REF NO PART NO. 44 45 46 47 48 49 50 1921515 1922128 1916965 1922755 1726867 1726866 1726865 QTY. DESCRIPTION 2 1 1 1 1 1 1 CAPSCREW, Hex Head, 5/16-24 x 3/4 G5 CAPSCREW, Hex Head, 3/8-24 x 1-1/2 G8 LOCKWASHER, Spring, 3/8 WASHER, 3/8 PULLEY, Engine Outside, Powdered Metal PULLEY, Engine Middle, Powdered Metal PULLEY, Half Powdered Metal Footnotes * See your local Briggs & Stratton distributor for Parts & Service. The above parts group applies to the following Mfg. Nos.
Engine and Frame Group with Power Boost 987038 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 18 16 20 11 21 22 23 24 14 8 10 25 21 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6).
Engine and Frame Group with Power Boost REF NO PART NO. 1 1 2 3 4 5 6 7 8 9 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 37 37 37 37 37 1700415 1672732 1928731 1668477 1960647 1665994 1703046A 1727149 1722460 1676460 1666655 1729646A 1928352 1726348 2860709 2159106 1725287 1935255 2820426 1918249 1724064 1666697 1930591 1726568C 1931317 1960685 1720404A 1664847 1930595 1726870C 1925003 1727004A 1927557 1919326 1923362 1702969 1929477 1725664A * * * * * * QTY.
Engine and Frame Group with Power Boost 987038 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 18 16 20 11 21 22 23 24 14 8 10 25 21 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6).
Engine and Frame Group with Power Boost REF NO PART NO. QTY.
Auger and Impeller Group 985466R1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 35 End of hub to be flush with end of rolled down shaft (Ref. 9). 1 4 2 34 Torque to 30 -34 ft-lbs. 40 - 46 Nm. 36 15 5 10 7 6 2 14 16 10 17 10 15 18 12 19 9 3 8 11 Impeller to be positioned against bearing before tightening set screw. Marked side of worm gear must contact against left thrust washer to assure proper gear mesh. 13 6 21 20 30 Torque to 18-21 ft-lbs.
Auger and Impeller Group REF NO PART NO. QTY.
Auger and Impeller Group 985466R1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 35 End of hub to be flush with end of rolled down shaft (Ref. 9). 1 4 2 34 Torque to 30 -34 ft-lbs. 40 - 46 Nm. 36 15 5 10 7 6 2 14 16 10 17 10 15 18 12 19 9 3 8 11 Impeller to be positioned against bearing before tightening set screw. Marked side of worm gear must contact against left thrust washer to assure proper gear mesh. 13 6 21 20 30 Torque to 18-21 ft-lbs.
Auger and Impeller Group REF NO PART NO. 37 1709894 QTY. DESCRIPTION 2 BUSHING, Plastic (Used on 38 in. Models) Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.
Auger Housing and Chute Group - 24, 28 & 32 inch 987028 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 21 Decal must cover gap at hinge pivot. 20 11 25 5 14 12 4 19 22 7 6 17 18 13 3 2 Plastic washer (Ref. 2) goes between chute and deflector. 14 16 8 1 15 Mount cable bracket (Ref. 22) on right hand side of handle using shift control bracket hardware. 41 9 10 When installing cable, make sure it does not come into contact with muffler.
Auger Housing and Chute Group - 24, 28 & 32 inch REF NO PART NO. QTY.
Auger Housing and Chute Group - 24, 28 & 32 inch 987028 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 21 Decal must cover gap at hinge pivot. 20 11 25 5 14 12 4 19 22 7 6 17 18 13 3 2 Plastic washer (Ref. 2) goes between chute and deflector. 14 16 8 1 15 Mount cable bracket (Ref. 22) on right hand side of handle using shift control bracket hardware. 41 9 10 When installing cable, make sure it does not come into contact with muffler.
Auger Housing and Chute Group - 24, 28 & 32 inch REF NO PART NO. 42 42 42 1729724C 1729726C 1729728C QTY. DESCRIPTION 1 1 1 HOUSING AND IMPELLER ASSEMBLY, 24 in. HOUSING AND IMPELLER ASSEMBLY, 28 in. HOUSING AND IMPELLER ASSEMBLY, 32 in. Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc.
Auger Housing and Chute Group - 38" Models 987050 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 19 18 7 10 25 14 11 17 20 8 6 15 9 12 16 5 13 14 4 21 Plastic washer (Ref. 3) place between chute and deflector. 3 Mount cable bracket (Ref. 20) on right hand side of handle using shift control bracket hardware. 2 1 When installing cable, make sure it does not come into contact with muffler.
Auger Housing and Chute Group - 38" Models REF NO PART NO.
Auger Housing and Chute Group - 38" Models 987050 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 19 18 7 10 25 14 11 17 20 8 6 15 9 12 16 5 13 14 4 21 Plastic washer (Ref. 3) place between chute and deflector. 3 Mount cable bracket (Ref. 20) on right hand side of handle using shift control bracket hardware. 2 1 When installing cable, make sure it does not come into contact with muffler.
Auger Housing and Chute Group - 38" Models REF NO PART NO. 45 46 1666613 1717477A QTY. DESCRIPTION 3 1 HOLD DOWN, Chute GEAR, Chute Footnotes The above parts group applies to the following Mfg. Nos.: 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.
Traction Drive Group 987054 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Mounted inside of frame. 2 Pack groove with grease. 3 4 1 5 2 3 13 Lubricate with 5W 50 Synthetic oil. 12 6 14 7 Apply loctite (2 places). 8 20 1 Hook end to top left corner slot of frame. 11 10 Mount to bracket in frame weldment. Apply Loctite and• Torque to 55 - 60 in-lbs. when all parts are against hub. 9 21 18 Mounted outside of frame. 23 19 Mounted outside of frame.
Traction Drive Group REF NO PART NO.
Traction Drive Group 987054 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Mounted inside of frame. 2 Pack groove with grease. 3 4 1 5 2 3 13 Lubricate with 5W 50 Synthetic oil. 12 6 14 7 Apply loctite (2 places). 8 20 1 Hook end to top left corner slot of frame. 11 10 Mount to bracket in frame weldment. Apply Loctite and• Torque to 55 - 60 in-lbs. when all parts are against hub. 9 21 18 Mounted outside of frame. 23 19 Mounted outside of frame.
Traction Drive Group REF NO PART NO. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 1665521 1666425 1666855 1666001 1720299 1928721 1672595A 1919394 1729254 1720300 1930570 2812808 1730228 2860169 1720305 2172206 QTY.
Wheels & Tires Group 986549 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 2 3 4 5 6 7 6 8 4 9 10 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.
Wheels & Tires Group REF NO PART NO. 1 2 3 3 4 5 5 6 6 7 7 8 8 9 10 1921978 1919438 1726743 1726745 2172353 1714242 1722762 1727074 1727075 1726742 1726744 1720307 1722761 2153038 1666969 QTY. DESCRIPTION 1 1 1 1 2 1 1 2 2 1 1 1 1 2 1 CAPSCREW, Hex Head 5/16-18 x 2 G5 NUT, Hex Lock ESNA Light 5/16-18 NC-3B WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 24 & 28 in. Models) WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 32 & 38 in. Models) VALVE STEM & CAP ASSEMBLY, Air HUB, Wheel R.H.
Decal Group 987131 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 3 2 Free Hand Locked Free Hand Unlocked WARNING Au ger Enga ge AVOID SERIOUS INJURY OR DEATH 1727020 Tract ion Engage Tract ion Disengage • Read the operator's manual for operating and safety • Always direct discharge chute so as to avoid instructions. injury to persons or damage to property. • Do not defeat the safety features of control.
Decal Group REF NO PART NO. 1 1 2 3 3 4 5 6 6 7 8 9 9 9 9 9 10 10 11 11 12 13 14 14 15 16 QTY. DESCRIPTION 1726945 1727022 1715557 1726946 1727023 1715558 1722867 1726947 1727024 1714245 1714246 1727019 1731195 1731196 1731197 1724075 7071880 1727207 1716532 1727208 * 1725507 * * 1720454 * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 DECAL, Dashboard EZ Turn L.H. (Tube Handle Models Only) DECAL, Dashboard EZ Turn L.H.
Headlight Group 986371 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 7 2 4 5 6 3 Existing Hardware The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved.
Headlight Group REF NO PART NO. 1 2 3 4 5 6 7 1725291 1701011 2834683 1709256A 1917372 1725292C 1931333 QTY. DESCRIPTION 1 2 1 1 1 1 1 HEADLIGHT ASEMBLY TIE, Self Locking CLIP, Wire LOCKWSHER, 5/16 NUT, Hex, 5/16-18 BRACKET CARRIAGE BOLT, 5/16-18 x 3/4 Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc.
Hardware Identification & Torque Specifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Washer Hardware Grade Lockwasher Carriage Bolt No Marks SAE Grade 2 Hex Nut Size Of Hardware Standard Hardware Sizing 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 When a washer or nut is identified as 1/2”, this is the
MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.com © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.
