Product Manual

12
Assembly
Hitch Installation
(All Models)
1. Install the hitch support (AL, Figure 6) on the inside of
the drawbar support (on tractor) using four capscrews
(B) and four nuts (G) as shown.
BG
AL
B
Figure 6
2. Secure the bottom of the hitch assembly bracket (AM,
Figure 7) to the hitch support (AL) using two capscrews
(C), four washers (M) BETWEEN (AL & AM), and two
nuts (H). DO NOT FULLY TIGHTEN.
AM
H
C
M
MAL
Figure 7
3. Secure the hitch assembly bracket (AM, Figure 8) to the
outside of the drawbar support and hitch support using
two capscrews (D) and two nuts (I). FULLY TIGHTEN
HARDWARE IN STEP 2.
AM
I
D
Figure 8
4. Install the hitch assembly (AN, Figure 9) on both sides
of the drawbar support. Secure using three capscrews
(C), three washers (N), and three nuts (H).
NOTE: Some existing hardware may need to be
removed.
N HC
C
N
H
AN
Figure 9
Not for
Reproduction