Technical data

4.3. Listening to a recorded voice message
To listen to a voice message press “Play” after recording. If you have several messages
use the arrow button to select the desired voice message.
Hint: You have the possibility to jump to the last or the first file. Therefore push and hold
“Right arrow” and in addition press “Play” to reach the last file or push an hold “Left arrow”
and in addition “Play” to jump to the first file.
4.4. Deleting voice messages
Milestone 212 enables you to delete voice messages directly without a connection to the
computer.
•
Delete one voice message:
Play the voice message you would like to delete. While the message is playing, hold
down the “Mode” button and briefly press “Play”. The message will be erased when you
let go of the buttons. A message may be erased as well after the replay has stopped.
•
Delete all voice messages in one direction:
Pause the playback. By pressing the triple-button combination “Mode”, “Play” and “Right
arrow” or “Mode”, “Play” and “Left arrow” Milestone will erase all voice messages in the
corresponding direction, including the file the cursor is on when you push the buttons.
The triple-button combination needs to be pressed for two seconds. A long beep
signalizes the start of erasing. The erasing sound signalizes the end of erasing.
4.5. The 5 recording folders
Milestone 212 provides 5 folders on the internal memory wherein you can record your
voice messages. By default Milestone 212 stores the recordings in folder “M1”.
4.5.1. Changing between the folders
To change the folder push an hold “Selector”, then in addition press one of the 5 front
buttons. When releasing the buttons you jump inside the dedicated folder. So each front
button is directly linked to one folder. For example the button combination “Selector” and
“Mode” leads to folder M5 and “Selector” and “Right arrow” leads to folder M4.
4.5.2. Voice labeling of folders
Push and hold “Rec” and after a click hold down “Mode” as well. Milestone says “folder”,
afterwards speak the new voice label. The recording will be ended when you release both
buttons and you will hear the sound sequence “high pitched-low pitched”. Please note that
very short recordings are rejected. The new voice label is announced the next time you
reach this folder. A recorded folder name can be overwritten at any time by recording a
new one.
Hint: You can delete recorded folder names directly on Milestone 212. Erasing of a file is
usually done by selecting a file and using the combination “Mode” and “Play”. The hidden
folder name file can not be selected the usual way. Please re-record the folder name first
to activate the corresponding file and afterwards press the erase combination “Mode” and
“Play”.
10/16