Technical data

2.4. Reading rate control
To increase reading rate by one level (10%), hold down the “Selector” button and then in
addition press the “Right arrow”. To decrease the reading rate use the “Selector” button
with the “Left arrow”. Adjustment of reading rate is only possible while playback of a file.
The range of reading rates extends from 50% (half speed) to 200% (double speed). A
deep, short beep signalizes the original speed level. Further speed selections can be
made in the menu.
2.5. Select application
The “Selector” button, on the Milestone 212 will cycle through the available applications.
The applications are announced by name after the “Selector” button is pressed.
2.6. Information Service
Keep the “Mode” button pressed for 1.5 seconds to start the Information Service. To stop it
press “Selector” once or wait until all information have been announced.
2.6.1. Information Service in Books
If you are located in Books you receive the following information:
•
Position in the current book
•
Name of the book
•
Battery status
•
Memory status
•
Software version
•
Serial number of your Milestone 212.
2.6.2. Information Service in Voice recorder
If you are located in Voice recorder you receive the following information:
•
Name and storage position of the current voice record
•
Battery Status
•
Memory Status
•
Announcement of backup option
•
Software version
•
Serial number of your Milestone 212.
2.6.3. Information Service in Audio
If you are located in Audio you receive the following information:
•
Name and storage position of the current file
•
Battery Status
•
Memory Status
•
Software version
•
Serial number of your Milestone 212.
4/16