Technical data

4.6. External microphones
The jack on the right side of the front end you can use to connect an external microphone
with a 3.5 mm jack. The microphone is powered by Milestone 212 and does not need an
own amplifier. With a connected microphone Milestone 212 switches automatically from
the integrated to the external microphone. Recordings are saved as MP3 files with a
quality of 128 kbps. The handling stays the same as with the integrated microphone.
4.7. Copy your voice recordings to the SD card
To copy all your voice recordings from the internal memory of Milestone 212 to the inserted
SD memory card please open the Information Service. Therefore push and hold “Mode” for
1.5 seconds until Milestone starts speaking. Press the “Right arrow” when you hear the
announcement “For a backup copy of your internal memory on the SD card please press
right arrow now”.
4.8. Shortcut overview of Voice recorder
Function
Operation
Acoustic feedback
Short recording
“Rec” (push and hold)
“Click”
Start continuous recording
“Rec” + “Play”
Sound sequence “low
pitched-high pitched”
Pause or continue a
continuous recording
“Play” (during continuos
recording)
Short beep
End continuous recording
“Rec”
Sound sequence “high
pitched-low pitched”
Playback or pause a record
“Play”
-
Playback next record
“Right arrow”
-
Playback previous record
“Left arrow”
-
Jump to last record
“Right arrow” + “Play”
-
Jump to first record
“Left arrow” + “Play”
-
Erase current record
“Mode” + “Play”
Erasing signal
Choose between folder 1 to 5
“Selector” + a front button
Folder name
Voice labeling of current folder
“Rec” + “Mode” (push and hold)
Start of record with
“Folder”.
End of record with “high
pitched-low pitched”
11/15