Specifications

MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your tractor and mower.
SAFETY iTEMS
Check Safety Interlock System
Check Tractor Brakes
Check Mower Blade Stopping Time
TRACTOR MAINTENANCE iTEMS
Before
Each
Use
Every 5
Hours
Every 25
Hours
Every
100
Hours
Every
250
Hours
Spring &
Fall
O
®
• •
Before Every 5 Every 25 Every Every Spring &
Each Hours Hours 100 250 Fall
Use Hours Hours
Check Tractor/Mower for loose hardware •
Check/Clean Radiator (If Equipped) ** • •
Check / Clean Oil Cooler (If Equipped) ** •
Check / Clean Cooling Fins (If Equipped) •
Check / Adjust PTO Clutch •
Lubricate Tractor & Mower ** •
Lubricate Rear Axle Shafts Yearly
Clean Battery & Cables •
Check Tire Pressure •
Clean Deck & Check/Replace Mower Blades** •
Perform Transmission Maint. (Varies by ***
Model)
Change Hydraulic System Filter (If Equipped) **
Check Mower Blade Timing (40" Mower) Yearly
Check Arbor Drive Belt Tension (40" Mower) Yearly
ENGINE MAINTENANCE ITEMS Before Every 5 Every 25 Every Every Spring &
Each Hours Hours 100 250 Fall
Use Hours Hours
Check Engine Oil Level •
Check / Change Engine Air Filter *
Change Engine Oil & Filter *
Inspect Spark Plug(s) *
Check/Replace Fuel Filter *
• Refer to engine owner's manual. Change original engine oil after initial break-in period.
•* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
•** Service after the first 50 hours of operation, then every 250 hours of operation.
24