Specifications

RegularMaintenance

Lubrication

Service interval: Every 25 Hours

Lubricate the unit at the locations shown in Figures 19-

23 as well as the lubrication points listed. Generally, all

moving metal parts should be oiled where contact is

made with other parts. Keep oil and grease off belts and

pulleys. Wipe surfaces clean before and after

lubrication.

Grease:

[_ * steering linkage

• foot pedal

mower linkage

transmission idler assembly pivot

rear axle shafts (remove wheel hubs)

front axle where it contacts the frame

Use grease fittings when present. Automotive lithium

grease is recommended.

Oil:

* control linkage

* seat adjustment assembly

* brake linkage

mower deck height adjustment linkage

* manual lift lever

Figure 20. Lubricate Steering Linkage

Figure 19. Lubricating the Tractor

Figure 21. Mower Lubrication Points

Figure 22. Mower Lubrication Points

Figure 23. Arbor Lubrication Point