Specifications

G15

GE Limitamp

Medium Voltage Motor Control

Components

Application

The ITI Type Test Switches and Test Plugs provide a safe,

simple, fast and reliable method to isolate and service

installed equipment.

Key Benefits

The FT Switches and FT Test Plugs have all the features neces-

sary for applications involving the measurement of individual

currents and voltages to facilitate testing of substation

instrumentation and protection devices from the front of the

panel. The make-before-break current short circuit feature

also allows test personnel to test quickly and safely.

The FT Switch is built with a maximum of ten individual poles

or switch units. The switches can be assembled in a variety

of different arrangements to match customer requirements.

ITI FT Test plugs are used in conjunction with the FT Switches

to enable easy measurement, calibration, verification or

maintenance of relay, meters and instruments.

Voltage measurements can also be made directly on the FT

Switch without disturbing existing connections. There is a

test clip provision located on the top of each pole that

allows connection with standard spring clip test leads.

With the cover in place, a meter type seal can be placed

through either of the cover studs of the FT Switch to prevent

unauthorized access to the switch. As an additional feature,

a clear cover is available that can be installed and locked

with the switchblades in the open or closed position.

FT Test Switch