Specifications

G23
GE Limitamp
®
Medium Voltage Motor Control
Components
G
Application
EB-27 terminal blocks are used where any permanent or
temporary wiring connections are required, especially if
many wires are involved.
Description
The EB-27 terminal blocks are molded one piece design
available in 4, 6, and 12 points. They are furnished with
washer-less head binding screws (#10-32) for circuit wire
connections. The blocks are supplied with a black marking
strip with white numbers on one side, and white unmarked
on the reverse side for circuit identification. To mount the
terminal block, drill for a No. 10 screw. The board will accom-
modate No. 18 to No. 10 inclusive wire sizes.
The minimum spacing between the barrier separation is
11/32 inches. The distance between adjacent connection
screws is 5/8 inches.
Multilin EB-27 Terminal Blocks