Operator`s manual

9. Ladder Load Dial - Indicates inclination in degrees (O degrees to 75 degrees) and suggests
maximum ladder extension permissible for varying load conditions.
10. Water Tower Nozzle Pattern Select Switch - Selects spray or fog mode for the Water Tower
nozzle delivery.
11. Water Tower Nozzle Sweep Control Switch - Controls movement of nozzle left and right.
12. Water Tower Nozzle Elevation Control Switch - Controls elevation and depression of the Water
Tower nozzle.
13. Ladder Elevation Control Joystick - Controls ladder elevation and depression.
14. Ladder Console Throttle Switch - When engaged, increases engine RPM to 1200.
15. Ladder Rotation Control Joystick - Controls ladder movement left and right.
16. Emergency Override Switch - when engaged, will override automatic overload controls and
allow extra extension and depression of the ladder for emergencies.
17. Cut Off Switch - When pushed in, stops all ladder movement by cutting the current to the
Ladder Control Joysticks.
18. Ladder Extension Control Joystick - Controls ladder extension and retraction.
19. Engine Start Button - Allows the operator to re-start a stalled engine at the Ladder Control
Console.
20. Control Panel Light Switch - Controls panel illumination.
16