Operator`s manual

8. Ladder will not a) Turntable not a) Level the truck bed

rotate. level. with the Outriggers or move to more

level ground.

b) Rotating relief b) Set relief valve (see

valve set too low. Figure 5-2, number 16) to 900 psi.

c) Manual by-pass c) Close by-pass valve

valve is open. (see Figure 5-2, number 19).

9. Ladder operates too a) Engine rpm too low. a) Set engine rpm to

slowly. 1200.

NOTE: For adjustment of hydraulic pressure, and relief valves refer to Section 8.