Owner's manual

Introduction
Congratulations, and thank you for purchasing our high
quality dehumidifier. When the dehumidifier has been
removed from the carton, it is completely assembled and
ready for use. This product has been manufactured to the
highest standard with safety and efficiency in mind, so please
take a few minutes to understand its components and
operating instructions. The following sections deal with
information on basic electrical safety, selecting the proper
location for optimum performance, the control panel,
components, and care for this product.
Important Electrical Information
This dehumidifier has been designed to work on ordinary
household current. However, to avoid any unnecessary
power interruptions, it is not recommended for use on a
circuit containing other electrical equipment such as air
conditioners, refrigerators or freezers. For your safety and
protection, the power cord on this dehumidifier has been
equipped with a grounding plug that must be plugged into a
properly grounded receptacle. If the receptacle that you
intend to use does not accept the grounding connector, or if
you are unsure if your receptacle is properly grounded, you
should have a properly grounded outlet installed.
DO NOT UNDER ANY CIRCUMSTANCES MODIFY THE
GROUNDING PLUG IN ORDER TO MAKE IT FIT A
RECEPTACLE.
Where To Position Your Dehumidifier
For best results, the dehumidifier should be operated in an
enclosed area. Close all doors and windows and other
outside openings to the room, as performance is greatly
influenced by the rate at which new moisture enters the room.
When positioning the dehumidifier in the room, be sure there
are no restrictions to the air flowing into or out of the
dehumidifier. For the best performance, allow at least 12
inches (30cm) around the unit.
Operating Your Dehumidifier
Humidity Control
Turn the humidity control to the off position (fully
counterclockwise) and plug into a properly grounded
receptacle. You are now ready to set the humidity control to
start the dehumidification process. Turn the humidity
control clockwise until the dehumidifier starts. Initially, it is
recommended that the humidity control be turned completely
clockwise. Allow the dehumidifier to run continuously for
three or four days, or until the desired level of dryness has
been achieved. Once the desired humidity level has been
reached, turn the humidity control counterclockwise until the
dehumidifier just shuts off. The dehumidifier will now cycle
automatically, maintaining the desired level of humidity that
you have set. You may adjust this setting at anytime. By
turning the humidity control clockwise, a lower humidity level
can be achieved.
Fan Speed Switch
Some models are equipped with a two speed fan switch.
For faster moisture removal, it is recommended to use the
#2 setting. The #1 setting will provide for quieter operation.
NOTE: OPERATING A DEHUMIDIFIER IN A COOL
ENVIRONMENT MAY CAUSE FROSTING OR ICE BUILD
UP ON THE EVAPORATOR COILS THAT WILL PREVENT
THE COLLECTION OF MOISTURE.
(Fig 2) Graph
(Fig 1) Control Panel
COMPACT MILLENNIUM DEHUMIDIFIER - OPERATING INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
The following spaces are provided for you to record information about this appliance for easy reference.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
1-75070 REV. 01
60%
50%
40%
30%
20%
10%
TEMPERATURE
RELATIVE HUMIDITY
16°C
60°F
21°C
70°F
27°C
80°F
32°C
90°F