User guide

52 MDX-ETHERNET User Guide
www.leroy-somer.com Issue : a
14 Quick reference
14.1 Complete parameter reference
Table 14.1 lists all the MDX-ETHERNET set-up parameters that are required to
configure the module.
Table 14.1 MDX-ETHERNET parameter reference
Parameter Default
Cross
reference
Description
15.01 147 Page 43 plugged option ID code
15.02 ---- Page 43 Module software version (XX,YY)
15.04 0 (automatic) Page 22 MDX-ETHERNET baud rate
15.06 --- Page 44 Fieldbus option state
15.07 1000 Page 51 Network loss trip timeout in millisecond
15.08 0 (LSB first) Page 46 Data bytes order
15.09 1 (2 registers by parameter) Page 30 Modbus register number by acyclic parameter
15.10 1040 Page 27 IN cyclic mapping 0
15.11 201 Page 27 IN cyclic mapping 1
15.12 0 Page 27 IN cyclic mapping 2
15.13 0 Page 27 IN cyclic mapping 3
15.14 0 Page 27 IN cyclic mapping 4
15.15 0 Page 27 IN cyclic mapping 5
15.16 0 Page 27 IN cyclic mapping 6
15.17 0 Page 27 IN cyclic mapping 7
15.18 0 Page 27 IN cyclic mapping 8
15.19 0 Page 27 IN cyclic mapping 9
15.20 642 Page 27 OUT cyclic mapping 0
15.21 121 Page 27 OUT cyclic mapping 1
15.22 0 Page 27 OUT cyclic mapping 2
15.23 0 Page 27 OUT cyclic mapping 3
15.24 0 Page 27 OUT cyclic mapping 4
15.25 0 Page 27 OUT cyclic mapping 5
15.26 0 Page 27 OUT cyclic mapping 6
15.27 0 Page 27 OUT cyclic mapping 7
15.28 0 Page 27 OUT cyclic mapping 8
15.29 0 Page 27 OUT cyclic mapping 9
15.30 0 (Disabled) Page 48 Return MDX module to default settings
15.32 0 (Disabled) Page 23 Fieldbus option reset
15.34 0 (disabled) Page 46 Compression of cyclical data
15.35 --- Page 45 Serial number
15.36 0 (Read write) Page 48 Disable full write access
15.38 8 Page 29 Input cyclical data bytes
15.39 2 Page 27 IN cyclic, number of channel (parameter)
15.40 2 Page 27 OUT cyclic, number of channel (parameter)
15.41 8 Page 29 Output cyclical data bytes
15.49 --- Page 44 mapping status
15.50 0 (No error code) Page 45 Fieldbus trip