User manual

Customizing the Toolbox 3-11
5. For 2nd Bar Color, click the
box to the right to choose a color
Below, the top bar is the 1st bar, since it was added fi rst.
“Always on top” bars
This feature controls which bar appears “on top,” when two bars overlap.
Before
To change, for example, the longer, thinner bar to be “on top”:
1. Click the tool.
2. On the schedule, click once on the left-most symbol to which the bar is attached. In this example, the left-
most symbol would be the purple circle.
3. In the Selection menu, click the Size/Color tab.
4. Horizontal bars from this symbol are on top of other bars.
After
Set Vertical Link Defaults
To change the attributes of a vertical link in the toolbox, double-click on the link in the toolbox. Any changes to the
vertical link in the toolbox will affect occurrences of that link on the schedule.

To set a link’s defaults:
1. Double-click a vertical link in the toolbox.
2. Click the drop-down menu to view the
options.
3. The sample link changes to match your
selections, as you make them:
 Choose a vertical link Color.
 Choose from a variety of Line Patterns.
 Choose from more than 15 vertical link
Shapes.
 Choose an Arrowhead Size if the link has
an arrow ending.
 Optionally, check Adjust (arrowhead
size) for chart symbol size to scale
the arrowheads based on the chart’s
symbol size setting. Without this checked,
arrowheads may look too large on charts
where the symbol size is less than one.
 Rounded Corners is a global setting that
affects all other vertical links in the toolbox.